520093
31
Zoom out
Zoom in
Previous page
1/127
Next page
31
<Functions of System Menu>
When using the system in the teacher mode
1. Set the "Teacher/Student" button to
[Teacher].
2
. Switch the "ACT/INH" button from [INH] to
[OFF] or [ON].
3
. If the teacher is using a T14MZ, set "12CH/
8CH" to [12CH]. If the teacher is using
another transmitter, set "12CH/8CH" to [8CH].
4
. Touch the "Switch" button to call the Switch
setup screen, and select the desired switch
and its ON/OFF direction.
(
For a detailed description of the selection
method, see "Switch Setting Method" at the
back of this manual.)
*The switch mode can be selected by ON position setting at
the Switch setup screen.
Normal switch operation is ON/OFF
operation. When [ALT] is selected, the trainer
function is alternately turned ON and OFF
each time the switch is turned on. The trainer
Trainer
Trainer system starting and setting
Since the T14MZ trainer system allows selection
of the functions and channels used in teaching at
the teacher's transmitter, the training difficulty
level matched to the student's experience of the
can be set. This function is used by connecting 2
transmitters together with the optional trainer cord.
W
hen the trainer switch at the teacher's side is
turned on, control from the student's side is enabled.
(When the "MIX" or "FUNC" mode is selected,
correction from the teacher's side is possible even
when the student is in control.) When the student's
side switch is released, control is returned to the
teacher. If the student makes a dangerous mistake,
control immediately switches to the teacher's side.
U
se this trainer system based on the following
conditions.
[Notes]
1.The order of the channels of the T4MZ
transmitter is different from that of other
transmitters. When connecting the T4MZ to
a transmitter other than a T4MZ, the order of
the channels must always be adjusted at the
Function menu of the Linkage Menu.
2
.In the teacher mode, set the modulation
mode of the student's transmitter to PPM.
When
using the system in the student mode,
set the T14MZ to the mode specified by
the teacher's transmitter. (If the teacher's
transmitter is a T14MZ, T9Z, T9C, or T7C, select
the PPM mode.)
3
.Be sure that all channels work correctly in
both transmitters before flying.
●Return to System Menu
Touch the [Trainer] button at the System Menu to
call the setup screen shown below.
(The display screen is an example. The screen depends on the model type.)
(The display screen is an example. The screen depends on the model type.)
function can be alternately turned ON and
OFF even when a momentary switch is used.
5. Select the operation mode of each channel.
"MIX" mode:
M
ixes and controls the signals from the
teacher and student transmitters.
"FUNC" mode:
A
dds a bit of the teacher AFR setting to the
signal from the student's transmitter and adds
this signal to the teacher's signal.
"OFF" mode:
[Notes]
1
. In the teacher mode, the trainer function
display does not come on as long as the
student's transmitter is not receiving signals
from the teacher's transmitter (when the
student's transmitter is not connected).
Corresponding types of transmitters:
T4VF, T6YG, T6YFK, T6X, T6EX, T7U, T7C, T8U,
T9C, T9Z, T14MZ
Non-corresponding types of transmitters:
T6VA, T6DA
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba T14-MZ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba T14-MZ in the language / languages: English as an attachment in your email.

The manual is 13,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Futaba T14-MZ

Futaba T14-MZ Quick start guide - German - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info