747917

Futaba T-16IZ Manual

113
Zoom out
Zoom in
Previous page
1/228
Next page
113
→ GO to TABLE OF CONTENTS
Telemetry data log function
Telemetry data has been adapted to the log function which is recorded at the microSD card.
【Setting method】
①
Open the linkage menu Tele. setting screen.
　
②
Log recording can be started and stopped by operating a switch. The Logging switch is selected.
③
The log output interval can be set.
* The data to be recorded is updated at the time set by Linkage menu
→
System Type screen D/L interval. For
example, when the log output interval is 1 second and the D/L interval is 2 seconds the same data is overlapped and
recorded twice.
【Operation method】
①
Insert the microSD card into the card slot.
②
Set the switch set by Log Start/Stop Switch to ON. A beep sounds and a log file is created and recording of the
telemetry data begins.
Absolutely never remove the microSD card while log data is being recorded.
③
Set the switch set by Logging switch to OFF. A beeping sound is generated and recording of the telemetry data stops.
④
Turn off the transmitter power and remove the microSD card.
■
Log file
A log file is created in the microSD card LOG folder. Two files with the same filename, but a different extension are
created. (Example: 00001234.FLI, 00001234.FLD)
■
Extension FLI: Slot allocation information file
■
Extension FLD: Log data file
*When copying or moving a log file, always select both the .FLI file and .FLD file.
Log files can be converted to CSV format by using the telemetry log converter available at the Futaba website.
■
Notes
◇
Altimeter altitude data and GPS distance and altitude data output with the point that time logging started as the
reference (0 m). When the transmitter preset position and the log start position are different, the transmitter display
and the log data display will also be different. The altitude and distance from the take-off position can be recorded by
starting logging immediately after take-off.
◇
The transmitter gear ratio or number of fins setting is not reflected in the speedometer log data (speed). Multiply the
gear ratio or number of fins by the speed data.
◇
When the microSD card becomes full, recording stops and does not resume even if logging is restarted.
Tele. setting
● Tap the [Tele.setting] button in the Linkage menu
to call the setup screen shown below.
Speech interval set , data logging of telemetry.
Set the speech interval of telemetry data, and the
logging of telemetry data to a microSD card at
chosen intervals.
Telemetry data can be checked on your PC after a
ight.
Sets the speech interval
Initial value: 0 sec.
Adjustment range 0-30 sec.
●Return to
Linkage menu
… 113 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba T-16IZ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba T-16IZ in the language / languages: English as an attachment in your email.

The manual is 35,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info