747917
112
Zoom out
Zoom in
Previous page
1/228
Next page
112
GO to TABLE OF CONTENTS
Telemetry : Airspeed sensor [Airspeed]
Displaying data from the airspeed
The speed screen displays and sets the speed
data from an SBS-01TAS (Airspeed sensor) sold
separately.
The speed of the aircraft during flight can be
displayed. After ight, the maximum speed during
flight can be viewed. Airspeed is the speed of an
aircraft relative to the air. You will be able to get a
more accurate aircraft speed.
*A Airspeed sensor must be installed in the aircraft.
Alarm setting when speed increases
1. Tap Alarm and choose from Buzzer, Voice, and
Inhibit.
2. Choose "Inhibit" for Vibrator if not using the vibrator
alarm. If using vibrator, choose one of the three
types.
3. Tap Limit [xxx km/h].
4. Adjust the rate using the "▼▼" "▼" "▲" "▲▲"
buttons.
Adjustment range 0km/h~800km/h
(↑Limit
↓Limit)
*When the screen is tapped for one second, the rate is reset
to the initial value.
5. To terminate the input and return to the original
state, push the HOME/EXIT button.
Sets the speed on
which the alarm
operates.
Tap the [Speed sensor] button in the Telemetry
screen to call the setup screen shown below.
Max. and min. values
since the power
was turned ON will
display.
Speed
Alarm is chosen from
Buzzer, Voice, and
Inhibit.
Allows Speech to be
turned ON or OFF.
*The Airspeed sensor is necessary, and is sold separately.
Mount and connect the sensor in accordance with the sensor
instruction manual.
*It cannot be used in FASST mode and S-FHSS mode.
*Only receiver voltage and EXT voltage can be used in
FASSTest12CH mode.
*The FASSTest18CH /T-FHSS mode can use all the telemetry
functions.
An upward arrow
indicates the alarm
will sound when the
speed reaches above
your set value.
A downward arrow
indicates the alarm
will sound when the
speed reaches below
your set value.
●Return to
Linkage menu
Type 1
Type 2
Type 3
If the following types are selected, the transmitter
will vibrate during the warning.
112


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba T-16IZ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba T-16IZ in the language / languages: English as an attachment in your email.

The manual is 35,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info