Manual Futaba T-16IZ (page 45 of 228) (English)

747917

Zoom out

Zoom in

1/228

→ GO to TABLE OF CONTENTS

1. Model addition and call

Initial setting assigns 1 model to the T16IZ

transmitter. The Model Select function is used to

add models and to select models which are already

set.

The data for up to 30 models can be saved

to the transmitter. Data can also be saved to the

optional microSD card.

The currently selected model name is displayed at the

top of the screen. Before ying and before changing any

settings, always conrm the model name.

2. Model type selection

Select the model type matched to the aircraft with the

Model type select function of the Linkage menu. For an

airplane, select the model type from among the 2 types:

airplane and glider. After the wing type is selected the

tail type select screen is displayed. Select the tail type

matched to the aircraft.

There are 13 wing types and 3 tail types for airplane

and glider.

3. Fuselage linkage

Connect the ailerons, elevators, throttle, rudder, etc.

in accordance with the model's instruction manual.

For a description of the connection method, see the

"Servos connection by model type".

Note: The channel assignment of the T16IZ is

different from that of our existing systems. Note

that even for the same "airplane model", when the

wing type and tail type are different, the channel

assignment may be different. (The channel assigned

to each function can be checked at the "Function"

of the Linkage menu.)

Airplane basic setting procedure

● If the direction of the servo is incorrect, adjust

the direction with the Reverse function of the

Linkage menu.

● Adjust the neutral position and control surface

angle with the linkage, and fine tune them

with the Sub trim and End point functions

(angle adjustment). To protect the linkage,

a limit position can also be set with the End

point function. The End point function can

adjust the amount of up/down and left/right

movement, limit, and servo speed of each

channel.

4. Throttle cut setting

Throttle cut can be performed with one touch by a

switch without changing the throttle trim position.

Set throttle cut with the Throttle cut function of the

Linkage menu. After activating the throttle cut function

and selecting the switch, adjust the throttle position so

that the carburetor becomes fully closed. For safety, the

throttle cut function operates the throttle stick in the 1/3

or less (slow side) position.

MODEL BASIC SETTING PROCEDURE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Futaba T-16IZ in the language / languages: English as an attachment in your email.

The manual is 35,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Futaba T-16IZ Manual

Product: