747917

Futaba T-16IZ Manual

43
Zoom out
Zoom in
Previous page
1/228
Next page
43
→ GO to TABLE OF CONTENTS
Model ID
FASSTest, T-FHSS
For the sake of safety, this function does not operate the receiver if the model data of the model program
settings that does not match the aircraft is used by mistake.
■ In the system types (FASSTest, T-FHSS) compatible
with the model ID function, a unique ID number
(model ID) is set to each model data. Linking with
a receiver stores the model ID of the model data
in that receiver. The receiver operates only when
it receives radio waves transmitted using model
data that matches the stored model ID. As a result,
the receiver does not operate even if model data of
an unintended setting is used by mistake, so it is
possible to prevent a malfunction due to a model
selection mistake.
■ If you want to use different model data from the
model data that you have been using, link again.
■ Model ID feature is enabled only if the system type
is FASSTest or T-FHSS. Please note that model ID
function can not be used on other systems.
Link is required when a new model is made from a model selection.
Model 1 Receiver
Add new model data
Link
Select a model in Model Select. Link with a receiver that matches the model.
Link
Link
Model 2 Receiver
Model 3 Receiver
1:
3:
Model 1
Model 2
Model 3
2:
1:
3:
Model 1
Model 2
Model 3
2:
1:
3:
Model 1
Model 2
Model 3
2:
Rx 1
Rx 2
Rx 3
Select Model 2
It works with different model data.
There is a risk of flying with different model data !
Select Model 2
Model 2 only works with Model 2 data.
There is no risk of flying with different model data.
Conventional system
Model ID
Operation
Operation
Rx 1
Rx 2
Rx 3
Operation
Operation
Not Operation
Not Operation
■ For safety reasons, model ID function can not be
disabled.
■ Model data that can be stored in internal memory is
up to 250 models.
■ Model ID is automatically set when copying or
adding model data.
■ R3004SB receiver does not support model ID
function. When using the R3004SB, set “Receiver”
in the system type screen T-FHSS mode setting to
[R3004SB]. When using other T-FHSS compatible
receivers, set "Receiver" to [Normal].
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba T-16IZ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba T-16IZ in the language / languages: English as an attachment in your email.

The manual is 35,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info