747922
170
Zoom out
Zoom in
Previous page
1/183
Next page
170
Data
This section describes the functions often used at the function setup screen. Refer to it when setting
each function.
Group/single mode switching (Gr/Singl)
When setting multiple flight conditions,
linking the setting contents with all conditions
(group mode) or setting independently (single
mode) can be selected. The mode can be
changed at the [Gr] item on each setup screen.
[Group/single mode switching]
ŏGroup mode (Gr)
The same setting contents are set to all
the Áight conditions.
ŏSingle mode (Singl)
Set this mode when the setting contents
are not linked with other conditions.
Condition delay setting
Unnecessary fuselage motion generated
when there are sudden changes in the servo
position and variations in the operating time
between channels can be suppressed by using
the condition delay function of the condition
select function [Condition select].
When the delay function is set at the
switching destination condition, a delay
corresponding to that amount is applied and the
related functions change smoothly.
[Setting method]
1. Switch to the condition you want to set
and tap the delay[ 0 (value)].
2. Set the delay using the
"▼▼" "▼" "▲
"
"ʆʆ" buttons
Initial value: 0
Adjustment range: 0~27 (maximum delay)
(When the value is tapped, the delay is reset to the initial
value.)
ŲƓƈƕƄƗƌƒƑƖŃƕƈƏƄƗƈƇŃƗƒŃƳƌƊƋƗŃƆƒƑƇƌƗƌƒƑƖ
ŲƓƈƕƄƗƌƒƑƖŃƙƄƏƘƈŃƖƈƗƗƌƑƊ
Tapping the value setting buttons on each screen will cause value input
buttons to appear at the top of the panel.
Value input buttons display
at the top of the panel
Pressing and holding
a value will return it
to its default setting.
Small change
in value
Large change
in value
Large change
in value
Common operations used in function setup screen
Tap
Tap
Tap
170


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba FX36 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba FX36 in the language / languages: English as an attachment in your email.

The manual is 11,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Futaba FX36

Futaba FX36 User Manual - German - 61 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info