747922
46
Zoom out
Zoom in
Previous page
1/183
Next page
46
Model Basic Setting Procedure
ŔőŃŰƒƇƈƏŃƄƇƇƌƗƌƒƑŃƄƑƇŃƆƄƏƏ
Default setting assigns 1 model to the FX-36. To add
new models or to call a model already set, use the Model
select function.
This is convenient when calling a model after
registering the model names in advance. (The data of up
to 30 models can be saved at the transmitter. Data can
also be saved to the optional SD card.)
The currently called model is displayed at the top
of the screen. Before flying and before changing any
settings, always con¿rm the model name.
ŕőŃŰƒƇƈƏŃƗƜƓƈŃƄƑƇŃƖƚƄƖƋŃƗƜƓƈŃƖƈƏƈƆƗƌƒƑ
If a different model type is already selected, select
helicopter with the Model type function of the Linkage
menu, and then select the swash type matched to the
helicopter.
*The Model type function automatically selects the
appropriate output channels, control functions, and mixing
functions for the chosen model type. Eight swash types are
available for helicopters.
*For a description of the swash type selection, refer to the
Model type function.
ūƈƏƌƆƒƓƗƈƕŃƅƄƖƌƆŃƖƈƗƗƌƑƊŃƓƕƒƆƈƇƘƕƈ
This section outlines examples of use of the helicopter functions of the FX-36. Adjust the actual values, etc. to match
the fuselage used.
ŖőŃũƏƌƊƋƗŃƆƒƑƇƌƗƌƒƑŃƄƇƇƌƗƌƒƑ
The transmitter can install up to eight Àight conditions
per model.
The Condition select function automatically allocates
¿ve conditions for helicopter.
(General setting)
ŏ Normal
ŏ Idle up1
ŏ Idle up2
ŏ Idle up3
ŏ Hold
Note: Delete conditions you have not set
up and will not use. Otherwise you may
accidentally activate them during Áight and
cause a crash.
*For a description of the condition deletion, refer to the
Condition select function.
The Normal condition is always on, and remains on
until other conditions are activated by switches.
The priority is throttle hold/idle up 2/idle up 1/normal.
Throttle hold has the highest priority.
Add other conditions, as required.
The Condition delay can be programmed for each
channel. The Condition delay is used to change the servo
throw smoothly when switching conditions.
(*eneral Àight condition setting example)
ŏ Normal: (8se initial setting conditions/operate
when switch OFF)
8se from engine starting to hovering.
ŏ Idle up 1: (Operate at SW-E center)
8se in 540 stall turn, loop, rolling stall turn, and other
maneuvers.
ŏ Idle up 2: (Operate at SW-E forward side)
8se in rolls.
ŏ Throttle hold: (Operate at SW-G forward side)
8se in auto rotation.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba FX36 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba FX36 in the language / languages: English as an attachment in your email.

The manual is 11,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Futaba FX36

Futaba FX36 User Manual - German - 61 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info