Order Numbers
F4090 - F4091 - F4092
F4095 - F4096 - F4097
52
17. Accessories
FX transmitter tray No.8373
A modern transmitter tray with
handrests, moulded in carbon
fibre-look material. Integral
storage compartments for
crystals and tools. The special
form of the tray provides access
to the rear-mounted linear sliders
for transmitter tray users. The
transmitter battery can also be
recharged without removing it
from the tray.
FX support system No 8374
Neckstrap with central plate for
secure fixing to the transmitter
back panel.
The bars lock in the vertical
position. For transport the bars
can be folded back, and for
programming they can be folded
to the side.
FX shell handles No.8376
Self-adhesive shell handles
moulded in special non-slip
plastic.
The handles provide even better
moulding of the transmitter to fit
the pilot’s hands, and a secure
transmitter grip even if you
specialise in powerful "hand-
launches".
Contents:1 pair
FX carry handle No.8375
A practical carry handle is
available for pilots who prefer a
hand-held transmitter.
Helical aerial,35 MHz
No. 8081
Helical aerial,40/41 MHz
No. 8072
These short helical aerials can be
used as an alternative to the
telescopic aerial.
The principal advantages are: no
wear, and greater freedom of
movement. Effective range is
about 30% lower.
Single-point neckstrap
No. F 1550
Soft neckstrap, adjustable in
length, with spring clip and
swivel.
FX long rear linear slider
No. F 1586
Linear slider for installation in the
back panel of the transmitter.
Supplied with 2 long operating
levers; can be used left or right.
The version with long levers is
recommended for use in a
transmitter tray. Also expands
Multi-modules by one
proportional channel.
FX short rear linear slider
No. F 1590
Linear slider for installation in the
back panel of the transmitter.
Supplied with 2 short, low-profile
operating levers; can be used left
or right. The version with long
levers is recommended for use in
a transmitter tray. Also expands
Multi-modules by one
proportional channel.
FX ball and socket aerial base
No.F 1559
Ball and socket base for
telescopic aerial. Variable aerial
rake for optimum radiated power.
Cross-over neckstrap
No.8151
Comfortable, adjustable-length
cross-over strap for transmitter
trays and support systems.
Promotes fatigue-free model
flying even over long periods.
Broad, soft strap for pleasant,
comfortable flying.
FX front linear slider
No.F 1587
Expands the FX transmitter by
one slider channel on the front
panel. Supplied with operating
knob and scale label. Also
expands Multi-modules by one
proportional channel.
Long 3-position switched
channel
No.F 1588
Expands the FX transmitter by
one 3-position switched channel.
Also expands Multi-modules by
one proportional channel.
