30098

Futaba FP8SSHP Manual

15
Zoom out
Zoom in
Previous page
1/36
Next page
37 Back cover
To operate the trimmers and switches on the trimmer
panel [38] , remove this cover as shown in Fig. 28.
Remove the back cover by pulling stoppers in
the direction of arrows.
Fig.
28
Fig.
31
2. LINEAR-VTR switch
This switch switches the travel linearity
of the aileron servo when the aileron
dual rate switch
[14]
is in the OFF posi-
tion.
•When this switch is set to the LINE-
AR position, servo tracking is directly
proportional to the deflection of the
transmitter stick as shown by curve
B
of
Fig.
30.
•When this
switch is set to the VTR
(Variable Trace Ratio) position,
the
maximum servo throw is the same
as
LINEAR shown in Fig. 32. However,
servo tracking is the same as the dual
rate switch ON up to about 80% of the
total travel. Servo tracking then in-
creases abruptly up to the same throw
as
dual rate OFF. This tracking method
resembles
exponential operation and is
easy to use.
38 Trimmer panel
Switch and adjust the trimmers and switches on this
panel with the small flat blade screwdriver supplied.
A Ailerons
Fig. 32 shows the servo tracking operation when
dual rate switch is OFF and when switch is set
to
the VTR position.
1. Ailerons dual rate trimmer
This trimmer sets the aileron deflection
angle when the aileron dual rate switch
[14] is set to the ON position.
The deflection angle is adjustable from
40% to 100% of the total travel. When
the dual rate switch is set to ON, the
servo throw can be set to an arbitrary
angle smaller than that when the dual
rate switch is OFF (normal) as shown
in Fig. 30. Use the throw match-
ed to the helicopter and maneuvers
to
be performed.
Dual rate switch OFF
(Switch 2 in LINEAR position)
When the dual rate switch
is ON, the servo throw can
be adjusted (within this
range) with the dual rate
trimmer,
FIG 30
Servo tracking can be set
within this range with the
dual rate trimmer.
When the dual rate switch is
set to ON, operation is the
same as dual rate ON at
LINEAR.
Fig.
32
13
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba FP8SSHP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba FP8SSHP in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info