30098
4
Zoom out
Zoom in
Previous page
1/36
Next page
•The
receiver
is a
miniature
PCM
receiver
in
which the highest reliability has been pursued.
It is the first R/C receiver in the world to use
the newest computer technology.
•Miniature
PCM
receiver
with
hi-speed
single-
chip microprocessor. Resistance against adja-
cent band and noise interference has been
increased by one full order of magnitude.
•Microprocessor-controlled servo hold function
eliminates erroneous operation when the
"dead
point"
area
is
entered.
•Microprocessor provides fail-safe
and battery
fail-safe functions for greater safety.
•Error
lamp
display
allows
checking
of
the
receiver operating state.
•DC-DC converter in the power supply im-
proves the low-voltage operation character-
istic.
•High
sensitivity design
with
RF
amplifier
circuit.
•Ultra narrow-band ceramic filter and PCM
system are practically invulnerable to adjacent
band interference.
•Gold-plated connector pins eliminate poor
contact. Polarized housing increases reliability
against shock and vibration.
•DSC circuit. Each servo can be controlled
from the transmitter without turning on the
transmitter by connecting the transmitter
directly to the C terminal.
•New indirect-drive potentiometer improve
vibration and shock resistance and improves
neutral precision tremendously.
•Futaba low-power custom 1C provides high
starting torque, narrow dead band, and excel-
lent trackability.
•Fiberglass-reinforced PBT (polybutylene ter-
ephthalate) injection molded servo case is
mechanically strong and invulnerable to glow
fuel.
•Strong polyacetal resin ultra-precision servo
gear features smooth operation, positive neu-
tral, and very little backlash.
•Fiberglass-reinforced epoxy resin PC board
with thru-the-hole plating improves servo amp
vibration and shock resistance.
•Thick-film gold plated connector pins ensure
positive contact and greater reliability against
shock and vibration. The connector housing is
polarized to prevent reverse insertion.
•Six
special
adjustable splined horns
are
avail-
able.
2
•CONTENTS AND RATINGS
Ratings and specifications are subject to change without prior notice.
Model
Transmitter
Receiver
Servo
Switch
Nicd battery
Accessories
FP-8SSHP
FP-T8SSHP x 1 with module FP-TF-FM
FP-R118GPx 1
FP-S130x4
SWH-5 (R4-SWJ) x 1
NR-4Jx 1
Charger, extension cord, DSC cord (FSC-1), CHG adaptor, DSC-CHG cord, frequency
flag, spare horn, mounting screws, tachometer sensor (FTA-3)
Transmitter
FP-T8SSHP———————————— Receiver
FP-R118GP______________
Servo
FP-S130_________________
Operating system : Single-stick, 8 channels for Receiving frequency : 50/53MHz BANDSIChosen Control system -+pulse width control
helicopter 72/75MHz BANDS) band 1520uS.N
Transmitting frequency : 50/53MHZ BANDSIChosen Intermediate frequency : 455kHz Operating angle : One side 45"or more (in-
72/75MHz BANDS[band Power requirement . 4.8V Nicd battery (NR-4J- cluding trim)
53MHz • 72MHz shared with servo) Power requirement : 4.8V (shared with receiver)
Frequency change to any Current drain : 42mA (at 4.8V reception) Current drain : 5mA (at idle)
of above bands Is possible Dimensions : 2.23 x 1.65 x 0.94 in Output torque : 55.6oz-in (4kg-cm)
by merely changing RF (57 x 42 x 24mm) Operating speed : 0.24sec/60°
module. Weight :1.85ozl53g) Dimensions : 1.52 x .77 x 1.36 in
Modulation : PCM (FM) Receiving range : 500m on the ground l38.5xl9.5x34.5mm)
Power requirement : 9.6V 8/500mAH internal 1000m in the air Weight :1.47oz(42gl
Nicd battery (NT.8H) When FP.T8SSHP used
Current drain : 250mA (at the best conditions)
Receiver and servo Nicd battery NR-4J_
Charger FBC-8B12L
Input voltage
Output
: 120VAC, 50/60H2.4VA
: Tx side 9.6V. 45mA
Rx side 4.8V. 45mA
Voltage
Dimensions
4.8V.4/500mAH
:
2.01
x
2.28
x
0.59
in
151 x 5 8 x 15mm)
: 3.350Z (95g)
Weight
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba FP8SSHP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba FP8SSHP in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info