30094
38
Zoom out
Zoom in
Previous page
1/44
Next page
ADJUSTMENTS AND FLIGHT TECHNIQUES
INDEPENDENT AILERON DIFFERENTIAL OPERATION
• Adjustment of the Aileron Differential can help
reduce sideslip in turns and eliminate unwanted
Yaw movements in rolling maneuvers.
Install and connect the servos as shown in Fig.
71. Always connect the Right Aileron servo to
CH1 (Aileron). The Left Aileron servo is con-
nected to CH7.
• Set Switches 16
and 17 as shown in Fig. 70.
• The Aileron DOWN deflection can be adjusted
by using trimmer 15 .
• The differential amount increases as trimmer 15
is turned clockwise. The differential is zero when
trimmer 15 is turned fully counterclockwise.
This is the same as ordinary aileron differential
operation, except that the ELEVN down amount
can be adjusted with this trimmer.
(One aileron servo mounted at
the right and at the left)
Fig.
72
The down amount can be ad-
justed with trimmer 15.
Fig.
71
Connect to
receiver channel 7.
Connect to
receiver channel 1
* When connecting the linkage, connect channel 1
to the right wing aileron servo.
During
level
flight, smooth left turns
without
any sideslip can be made by increasing the right
wing aileron deflection angle without increasing
the left wing aileron deflection angle by turning
on
the aileron differential function. Smooth
right turns can be made by performing the op-
posite operation. Use this differential function
to reduce the aileron down angle rather than the
up angle.
Fig.
70
36
V.TAIL AND FLPRON MIXING
•This combination of mixing functions can be
used with V-Tail gliders and other aircraft with
full
ailerons.
• Set
Switches
16
and
17
as
shown
in
Fig.
73.
• See FLPRON and V-TAIL sections (Page 34, 35)
for complete instructions on each of these func-
tions.
Fig.
73
V.TAIL AND INDEPENDENT DIFFERENTIAL OPERATION
This combination can be used aircraft with V-
Tail and full ailerons.
• Set Switches 16 and [17] as shown in Fig. 74.
• Adjust Aileron differential with Trimmer [15].
•See the V.TAIL and aileron differential sections
for a description of the linkages.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba FP8SSAP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba FP8SSAP in the language / languages: English as an attachment in your email.

The manual is 2,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info