30094
27
Zoom out
Zoom in
Previous page
1/44
Next page
ADJUSTMENTS AND FLIGHT TECHNIQUES
•BFS
(BATTERY FAIL SAFE) AND BFS MEMORY
•BFS
(Battery
Fail
Safe)
is
a
warning
function
which moves only the throttle servo to the same
position as set for FS when there is only a small
amount of power left in the receiver Nicd bat-
teries. (If no FS position is set, the throttle servo
is moved to medium slow.)
•When BFS occurs, the throttle servo can be re-
leased and throttle control regained for 36
seconds by lowering the throttle lever to IDLE.
• The throttle lever position at which throttle con-
trol is regained is programmable. This is known
as BFS Memory and is set as follows:
1 Set Function Select Switch 49 to BFS MEMO
SET and set Channel Select Switch 48 to Pos.
3 (Throttle).
2 Set
the Throttle
lever
to
the
desired
release
point (between Slow and Medium Slow recom-
mended) and press Buttons 46 and 47 simul-
taneously. BFS Memory is now set.
3 Set
Switches
48
and
49
to
OFF.
4 Whenever BFS occurs in flight, lower the throt-
tle lever to regain control and immediately land
the aircraft.
•SERVO TEST FUNCTIONS
•The
operation of the
servos
can
be
checked
by
setting the transmitter and receiver power
switches to
ON.
•The
servo
test
is
started
by
pressing
button
46
and is stopped by pressing button .47].
•When switch 49 is switched to TEST-A, the
servos move half-side first and then, come back
to neutral and repeat the other-half from chan-
nel 1 to channel 8. (Channel select switch (R)
48 to TEST-ALL position at this time.) The
servos set by the channel select switch do not
operate. (If set to 5, the landing gear servo does
not operate.)
•When switch 49 is switch to TEST-B, all the
servos operate linearly over their full travel.
(Channel select switch (R) 48 in TEST-ALL
position at this time.) Only the servos set at the
channel select switch are operated.
Fig.
38
25
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba FP8SSAP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba FP8SSAP in the language / languages: English as an attachment in your email.

The manual is 2,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info