30072
17
Zoom out
Zoom in
Previous page
1/20
Next page
4. After setting the push rod at each servo, operate each servo fully left and right at least once. If the rod catches
or sticks at this time, the servo has been damaged by an overcurrent. Therefore verify that the rods are
functioning perfectly.
5. Be especially careful of noise signals. For instance, noise signals will be generated by the contact of metal
against metal due to engine vibration. If these noise signals are received at the receiver, the receiver may operate
erroneously. Therefore cover one of the metal surfaces with insulating material.
6. After installation is complete, ask a nearby radio control expert or the dealer where the equipment was purchased
to instruct you on the proper handling techniques and other items which may require special attention. Also
have your installation thoroughly checked at this time.
Strict observance of safety rules and adherence to the advise of experts will make radio control more enjoyable.
FUTABA PROPORTIONAL FREQUENCIES
(Available in MHz. Available Futaba pair crystal Tx/Rx)
27 MHz Areas
26.995 (Brown)
27.045
(Red)
27.095 (Orange)
27.145 (Yellow)
27.195 (Green)
72 MHz Areas
72.080 (Brown/White)
72.160 (Blue/White)
72.240 (Red/White)
72.320 (Violet/White)
72.400 (Orange/White)
72.960 (Yellow/White)
75.640 (Green/White)
Remarks: Mark * Model Aircraft use only.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba FP6FN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba FP6FN in the language / languages: English as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info