29053
69
Zoom out
Zoom in
Previous page
1/78
Next page
TRIM Mix 1 (TM1) & TRIM Mix 2 (TM2) - 4-S
TRIM PRESETS CALLED
BY A
SWITCH
Sailplane Section
The Trim Mix 1 & 2 function are used to pro-
gram a preset position of the ailerons, elevator,
and speed flaps with the use of a switch. They can
be used to program setting for different flight con-
ditions. For example. Trim mix 1 could be set up
for launching, with speed flaps and ailerons droop-
ed, and a slight amount of up elevator. Trim mix 2
might be used for high speed flying, with both
ailerons and speed flaps reflexed slightly, and a bit
of
down elevator.
The Trim Mix functions can be activated during
flight by setting a switch (trim mix 2 has priority).
To prevent sudden trim changes when switching
flight conditions, a delay can be set to provide a
smooth transition between the two. This might be
used during launch, so the flaps don't suddenly
come
back
to
neutral
position
and
dump
the
lift
all at once.
The presets as a group can be adjusted by
moving a volume control. When this is done, each
servo is adjusted at the same rate.
Setting Up Trim Mixing
Activation of command
In the Condition Menu. press the TM1 (or TM2)
key to get the TRIM MIX 1 (or 2) menu (Trim Mix 1 is
shown in the figure).
Mode Setting
Preset
Setting
Mode Selection Keys
Delay Rate Setting
To Next Screen
To On/Off Switch
Setting Menu
To Volume Setting
Return To
Condition Menu
Preset
Setting
Set Value, Including Volume Adjustment
Sailplane Section, Page 145
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 9ZHP_part2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 9ZHP_part2 in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info