29053
61
Zoom out
Zoom in
Previous page
1/78
Next page
Sailplane Section
SPEED FLAP-ELEVATOR MIXING—4-S
This
function
is
used
to
correct
the
trim
change
that occurs when the speed flaps are moved by
applying a small amount of elevator. For example,
if the fuselage pitches up when the speed flaps are
actuated, the elevator is commanded down simul-
taneously.
The mixing rates for up and down speed flap
commands can be set independently. Mixing can
be turned on and off during flight by setting a
switch, and you may also define a volume control
to change the mixing rate in flight. Speed flap mix-
ing remains on all the time unless an ON/OFF
switch is defined.
Activation of Speed Flap-Elevator Mixing
In the Condition Menu, press the
SPF
key to get
the SPEED FLAP menu. Press the
A
key to set the
SPF TO E LE menu shown below.
Mode setting
Mixing
Rate
Setting
Mode Selection Keys
To On/Off Switch
Setting Menu
Trim Volume
Setting
Return To Speed
Flap Mixing Menu
Use the A key to activate mode setting, then press
the ACT or
INH
keys ( F and
G
) to activate or
inhibit speed flap coupling.
Setting the Down Speed Flap Mixing Rate
Press the C key, and then set the down elevator mix-
ing rate with the numeric keys E to M . The setting
range may vary from -100 to +100% and the initial value
is
+50%.
Up Speed Flap Mixing Rate Setting
Press the D key and set the up elevator mixing rate
with
the numeric
keys E to M
.
The
setting
range
may
vary from -100 to +100% and the initial value is+50%.
ON/OFF Switch Setting
On initial setting, an activation switch for speed flap-
elevator mixing is not set, meaning that once activated, it
is on all the time. If you would like to set a switch to turn
it on and off, display the switch setting screen by pressing
the SWT
P
key, and use the keys to choose the switch
and ON direction you want. For a description of the
switch setting method, see page 37.
Mixing Rate Trim Volume Selection and Operating
Direction
Display the volume setting screen by pressing the
VOL
O
key. For a description of the volume setting
method, see page 37. The volume control adjusts ±25% of
the set mixing rate.
Sailplane Section, Page 137
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 9ZHP_part2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 9ZHP_part2 in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info