29053
59
Zoom out
Zoom in
Previous page
1/78
Next page
Sailplane Section
BRAKE
FLAP-SPEED
FLAP
MIXING—
5-S
This mixing is used to make the speed flaps
operate together as brake flaps. When the brake
flaps are deployed, the brake flaps and speed flaps
all perform the brake flap operation simulta-
neously.
The mixing rates for up and down brake flap
movement can be set independently. You may also
set up a switch for switching this mixing on and
off during flight. If this mixing is activated with-
out defining an ON/OFF switch, mixing remains
on all the time.
Activation of Brake Flap->Speed Flap Mixing
In the Condition Menu, press the
BKF
key to get the
BRAKE F LAP menu. Press the C key to get the BKF TO
SPF menu shown below.
Mixing State
Mode setting
Mixing
Rate
Setting
To On/Off Switch
Setting Menu
Return To Brake
Flap Mixing Menu
Mode Selection Keys Brake Flap Control Current Position
Use the A ( ) key to activate mode setting, then press
the ACT or
INH
keys ( F and G) to activate or
inhibit brake flap coupling.
Setting the Down Brake Flap Mixing Rate
Press the C key, and then set the down speed flap
mixing rate with the numeric keys E to M . The initial
value is +50% and the setting range may vary from -100
to+100%.
ON/OFF Switch Setting
On initial setting, an activation switch for brake flap-
speed flap mixing is not set, meaning that once activated,
is on all the time. If you would like to set a switch to turn
it on and off. display the switch setting screen by pressing
the
SWT P
key, and use the keys to choose the switch
and ON direction you want. For a description of the
switch setting method, see page 37.
Up Brake Flap Mixing Rate Setting
Press the D key and set the up speed flap mixing rate
with
the numeric
keys E to M
.
The
setting
range
may
vary from -100 to+100% and the initial value is+50%.
Sailplane Section, Page 135
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 9ZHP_part2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 9ZHP_part2 in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info