29053
32
Zoom out
Zoom in
Previous page
1/78
Next page
Helicopter Section
HOVERING THROTTLE (THV)
This
function
is
used
to
trim
the
throttle
around is hovering position. By setting a range,
adjustment is possible without changing the high
and low points. This Hovering throttle setting can
be changed between the flight conditions, and
ACT/INH may be set separately for each.
At initial definition, the right knob VR(B)
controls hovering throttle trim.
Servo
Servo
Stick Stick
Activation of command
In the Condition Menu, press the
THV
key to get the
THR HOVER menu shown below. Use the A key
to activate mode setting, then press the
ACT
or
INH
keys F and G) to activate or inhibit the function.
Mode setting
Trim Deflection
Width Setting
Range setting
Rate setting
Hovering Pitch
trim volume setting
Return to
Condition Menu
Mode selection Actual Value, Including Volume Adjustment
Hovering Throttle Trim Deflection Setting
Press the B key to allow input to this setting, and
input the rate with the numeric keys F to M. The
deflection may be set from 0 to 100% (when activated,
the initial value if this parameter is defined at 100%).
Setting of Range
Now you will set the Range of travel over which
HIGH/LOW sides do not change. Press the C key and set
the rate with the numeric keys
F to M.
The range may
be set from 0 to 100% (when activated, the initial value if
this parameter is defined at 100%).
Offset Rate Setting
The offset amount is entered by pressing the D key,
and input with the numeric keys
E to M .
This may be
input from -100 to +100%, and the initial value is
programmed to 0%.
Hovering Throttle Trim Selection and Operation Direction
Setting
Call up the volume setting screen by pressing the
VOL O
key. Set the volume control as desired (the
right-side knob VR(B) is set as the pitch trim volume
control initially). For a description of the volume setting
method, see page 37).
Helicopter Section, Page 108
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 9ZHP_part2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 9ZHP_part2 in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info