29011

Futaba 9ZHP_part1 Manual

34
Zoom out
Zoom in
Previous page
1/78
Next page
System Section
C
PC—COPY Condition Function
This function may be used to copy individual
flight conditions. One use would be to copy the
default flight condition, with all its subtrims,
mixing, etc. to another flight condition, and chang-
ing only the necessary parts. This procedure can
save a lot of time and unnecessary effort.
This
function
may
also be
used
to
delete
flight
conditions (other than default) from the CAMPac
memory module. The MSL (Model Select) func-
tion
may
be
used
to
delete
the
model
data.
The entire model data may be copied under the
following conditions:
1. If the destination type is different from the
source, the set data are copied.
2. If the destination type is the same as the source,
all the set data are copied except for the condi-
tion name.
3. If the source is not allocated to a model mem-
ory ("00"), all the set data, including the model
name, is copied.
Destination Condition Number -
Source Condition Number
-Show Condition List
-Confirm Condition
Number
Return to System
Menu
Numeric Keys Used to Choose Condition Numbers
Reading the Condition List
To display the condition list, press the
LST (R)
key. This displays conditions 1—10. To view the next ten
conditions, press the
NXT
(P) key. To view the
preceding ten conditions, press the
PRE
(O) key.
Conditions nos. 01-50 are stored in the transmitter, and
nos. 51-70 are stored in the optional CAMPac memory
module.
Flight Condition Copying
Follow the following instructions to copy one flight con-
dition to another:
1. Use the numeric keys on the display bottom to input
the Source condition number. The 1,15,30,45,60,
and 72 keys input the key's value directly. The ( + )
and ( - ) keys may be used to increase or decrease
the displayed value by one for each key press. When
you are satisfied with the source number, press the
SET (O)
key.
2. Now use the numeric keys to enter the Destination
condition number. Once again, enter the condition
number with the numeric keys at the display bottom,
and press the
SET
(
O
) key.
3. If you are happy with both condition numbers, press
the
YES (L)
key to execute the copy. If not, press
the NO (M) key to stop copying.
4. To continue copying further sets of conditions, press
the CNT (L) key and repeat the instructions
beginning from step 1.
To end copying, press the
END (N)
key.
Flight Condition Deletion
To delete conditions from the CAMPac memory module,
follow the following instructions:
1. Press the
DEL (A
) key to enter the deletion mode.
2. Press the + or - (F or G) keys to select the con-
dition to be deleted.
3. If the condition is correct, press the DEL (Q) key,
then confirm using the
YES
(L) key.
4. To continue deleting, press the CNT (L) key and
repeat the instructions beginning from step 1.
To end copying, press the END (N) key.
Condition No. (
01~50: Transmitter
51~72: Memory Module
System Section, Page 32
… 34 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 9ZHP_part1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 9ZHP_part1 in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info