Manual Futaba 9ZAP_part2 (page 5 of 78) (English)

29045

Zoom out

Zoom in

1/78

Airplane Section

RUDDER COUPLING (A->R)

This function is used to mix rudder operation

with aileron operation automatically, to make

realistic, coordinated turns. It is especially effec-

tive when turning and banking scale models or

large models that resemble full-sized aircraft. This

mixing

keeps

the

fuselage aligned

into

the

wind

and helps to make what is called "coordinated

turns."

The function allows you to set up the left and

right mixing rates independently. Furthermore,

mixing can be turned on and off during flight by

setting a switch, or it may be set to stay on all the

Setting Up Rudder Coupling

Activation of command

In the Condition Menu, press the

A->R

key to get the

AIL TO RUD menu, as shown below. Use the A

key to activate mode setting, then press the ACT or

INH

keys ( F and G ) to activate or inhibit rudder

coupling.

time if the function is activated (ACT) without

setting an ON/OFF switch. Also, it is possible to

adjust the amount of rudder coupling in-flight, by

setting a volume control.

Mode setting

Mixing i—— Left side

rate

setting I—— Right side

ON/OFF switch

setting

Trimming volume

setting

Return to

Condition screen

Mode Selection Values in ( ) are the mixing rate, including the trim volume.

Setting the Mixing Ratio — Left and Right

You now set the amount of mixing for left aileron

command. Press the C key to activate mixing ratio for

the Left direction and set the value with the numeric keys

F to M . The number keys 0 through

100

input the

value directly. The + and - keys increase or decrease

the value by 1. The +/- key may be used to reverse the

throw direction.

If you are not sure what you are changing, hold the

stick to one side and press different keys — if there is no

effect, move the aileron stick to the other side and con-

tinue. Your setting may vary from -100 to +100%. the

initial value is+50%.

Now set the amount of mixing for the Right aileron

command. Press the

key to activate mixing ratio for

the Right direction and set the throw with the numeric

keys as before.

On/Off Switch Setting

On initial setting, an activation switch for rudder

coupling is not set. meaning that once activated, it is on

all the time. If you would like to set a switch to turn it on

and off, call the Switch Setting screen by pressing the

SWT P

key. Then use the keys to choose the desired

switch location and on direction. For more information

on the switch setting method, see page 37).

Trim Volume setting

You may set up the Rudder coupling function so that

its effect may be changed in flight by moving a trim con-

trol. The trim control adjusts the volume within ±25% of

the set mixing rate. This option is not activated at initial

setup.

Call the volume setting screen by pressing the

VOL

key, and select the desired control using the screen

menus (for a description of the volume setting method,

see page 37).

Use the END (N) key to leave this menu.

Airplane Section, Page 81

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 9ZAP_part2 in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Futaba 9ZAP_part2 Manual

Product: