29047

Futaba 9ZAP_part1 Manual

27
Zoom out
Zoom in
Previous page
1/78
Next page
System Section
MS L—MODEL SELECTION
This function is used to load the settings of the
desired model into the PCM 1024Z's memory. The
settings may be selected from either the trans-
mitter's built-in memories, or from an optional
CAMPac. Remember that up to 10 memories are
available in the transmitter, and as many as 16 may
be stored in the CAMPac. The CAMPac is not
loaded with default models initially; they must be
loaded with the Copy Model [CPM] function.
Model Memory Selection Keys
Selected Model
No. and Name
Transmitter Model Memory List
Active Model No. and Name
END returns to
System Menu
To load a desired model from internal transmitter
memory to the active area:
1. Select the desired model number with the A to J
( 1 to 1 0 ) keys
2. Press the L ( YES ) key if correct, otherwise use the
M ( NO ) key to start over. Verify that the chosen
model number and name is now shown in the display's
top center.
3. Finish by pressing the N ( END ) key.
To load a desired model from CAMPac memory
module to the active area:
1. Press the P (
NXT
) key to display the first ten
models in the memory module's contents. Press it
again to get the remaining models. To return to the
previous model list, press (
PRE
). Select the
desired model number with the
A
to J (11 to 20 or
21 to 26 ) keys.
2. Press the L ( YES ) key if correct, otherwise use the
M ( NO ) key to start over. Verify that the chosen
model number and name is now shown in the display's
top center.
3. Finish by pressing the N ( END ) key.
To DELETE a desired model from CAMPac mem-
ory module:
1. Press the P (
NXT
) key to display the first ten
models in the memory module's contents. Press it
again to get the remaining models. To return to the
previous model list, press (
PRE
). Select the
desired model number with the A to J ( 11 to 20 or
21to 26 ) keys.
2. Press the L (
YES
) key if correct, otherwise use the
R( DEL ) key to start over. Verify that the chosen
model number and name is now shown in the display's
top center.
3. Press the R (
DEL
) key.
4. If this is the correct model to delete, press the
L (
YES
) key. To choose another, press the M
(
NO
)
key.
5. Verify the deletion from the model list. Then, exit by
pressing the
N
(
END
) key.
System Section, Page 25
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 9ZAP_part1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 9ZAP_part1 in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info