Manual Futaba 9CHPsuper (page 55 of 109) (English)

29041

Zoom out

Zoom in

1/109

ELEV-FLAP mixing (ACRO/GLID):

ELEV-FLAP mixing is the first pre-programmed mix weíll cover. This mix makes the

flaps drop or rise whenever the ELEVATOR STICK is moved. It is most commonly used

to make tighter pylon turns or squarer corners in maneuvers. In most cases, the flaps

droop (are lowered) when up elevator is commanded.

Adjustability:

•Rate: -100% (full up flap) to +100 (full down flap), with a default of +50% (one-half of the flap range is achieved

when the ELEVATOR STICK is pulled to provide full up elevator.)

•Switch: fully assignable. IF you set it to NULL, the mix does not work.

GOAL of EXAMPLE: STEPS: INPUTS:



Activate ELEV-FLAP mixing. Adjust

flap travel to 0% flaps with negative

elevator (push) and 45% flaps with

positive elevator.

Where next?

Open the ELEV-FLAP function.

Activate the function.

Adjust the travels as needed. (Ex: 0%,

to 45%.)

Close menu.

for 1 second.(If basic, again.)

to ELEV-FLAP.

LEVATOR STICK. to 0%.

ELEVATOR STICK. to 45%.

Adjust flaperons' flap travel available (FLAPERON): see p. 45.

Set up AIRBRAKE (crow/butterfly): see p. 56.

Set up programmable mixes (ex: FLAP-ELEVATOR): see p. 60.

View additional setups on the internet: www.futaba-rc.com\faq\faq-9c.html.

(ACRO)

(GLID)

•Range (GLID): The range that mixing does not work near neutral of an elevator stick can be set up.

Hold the stick to the desired point (upper or lower side) , then press DIAL and hold one second to set the range.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 9CHPsuper in the language / languages: English as an attachment in your email.

The manual is 8,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Futaba 9CHPsuper Manual

Product: