29007

Futaba 9CAPsuper Manual

39
Zoom out
Zoom in
Previous page
1/109
Next page
Auxiliary channel function (including channel 9 controls) (AUX-CH): defines the relationship between the transmitter
controls and the receiver output for channels 5-9. Also, the CH9 SERVO REVERSE is used to change the CH9 servo direction.
Note that the CH9 functions are only visible in the AUX-CH screen when PCM modulation is selected. The 9th channel is
not supported in FM modulation.
Adjustability:
•
channels 5-8 may be assigned to any SWITCH (A-H), slider [VR(D) and VR(E)], or
knob [VR(A-C)] (for example, moving flaps to a switch or slider), but not the
•
channel 9 may be assigned to any SWITCH (A-H) and the servo direction may be
changed.
primary control sticks (use programmable mixes to do so, p. 59);
•
multiple channels may be assigned to the same switch, slider or knob;
•
•
channels set to "NULL" are only controlled by mixes. (Ex: utilizing 2 channels for 2
rudder servos. See mixes, p. 59.)
Remember that if you assign primary control of a channel to a switch which you later use for other functions (like
dual/triple rates or airbrakes), every time you use that other function you will also be moving the auxiliary channel.
GOAL of EXAMPLE: STEPS: INPUTS:
39
Assign flaps to the right slider [VR(E)]
and set channel 7 to NULL in preparation
to use it as a smoke system control (the
smoke system being activated later by a
throttle-to-ch.-7 mix).
Where next?
Open BASIC menu, then
open AUX-CH function.
Choose the channel to change. (ex: ch. 6.)
Change primary control. (ex: to slider.)
Repeat as needed. (ex: ch. 7 to NULL.)
Close.
for 1 second.
(If ADVANCE, again.)
to page 2.
to Vr-E.
to Ch 7. to NULL.
Programmable mixes: see p. 54.
Set up dual/triple rates and exponential (D/R,EXP): see p. 35.
Adjust SUB-TRIM of auxiliary channel to adjust center SWITCH position: see p. 42.
Adjust END POINTs (sets end points of travel even when using a switch): see p. 32.
If GYRO SENSE, GOVERNOR, and THR-NEEDLE functions are activated, AUX-CH
settings of related channels become invalid automatically.
Related channels:
GYRO SENSE (ACRO): ch. 5, 7, or 8: see p. 65.
GYRO SENSE (HELI): ch. 5: see p. 96.
GOVERNOR (HELI): ch. 7, or ch. 7 and 8: see p. 97.
THR-NEEDLE (ACRO/HELI): ch. 8: see p. 58.
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 9CAPsuper at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 9CAPsuper in the language / languages: English as an attachment in your email.

The manual is 8,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info