29001
95
Zoom out
Zoom in
Previous page
1/105
Next page
91
The setting data for 8 models can be saved in the T8UAPS transmitter itself and
the setting data for 8 more models can be saved in the DP-16K CAMPac (Option)
removable memory module.
CAMPac initialization
To use the CAMPac with the T8UAPS, the CAMPac must be initialized when the
power is turned on for the first time. After the message "INIT? EXT-MEM" appears
on the screen when the power is turned on, press the "+" key. This automatically
initializes the storage area for 8 models. Further operation is unnecessary.
DP-16K CAMPac (Option)
When using the DP-16K CAMPac, remove the transmitter dust cap
and insert the data pack as far as it will go.
Always turn off the transmitter power before inserting or removing
the data pack.
The data memorized in the data pack using an old 8U Series can be copied to the memory in
the body of the 8Usuper Series transmitter. When old data is copied, initialization data for the
new functions added with the 8Usuper are added.
(1) Call the copy function in the BASIC menu/MODEL submenu. (Call the "Pac" screen
following "COPY" of the function name display at the top left of the screen.)
(2) Select the model No. you want to copy using the + or - key.
(3) Press the + and - keys simultaneously two times. (The data is copied to transmitter side
model No. 8.)
However, when data saved for mixing type "H-2" for helicopters using an old model was
copied to the T8UAPS transmitter, whereas the aileron and pitch travel in the old setting data
is fixed at 60%, both the aileron and pitch initial value settings of the new function (swash
AFR function) of the T8UAPS is 50%. Therefore, the travel is reduced by that amount.
Readjust after copying the setting data.
All the data memorized in the CAMPac using an old 8U Series can be batch converted to
8USUPER Series transmitter data. However, the converted CAMPac cannot be used with an
old 8U Series transmitter.
(1) While pressing the two BASIC menu keys simultaneously, turn on the transmitter power
switch. (The conversion function screen is called.)
(2) Press the + key. (Conversion is started and all the models data in the data pack are
converted.)
The data memorized in the data pack using the 8USUPER Series cannot be used with the old
8U Series.
The setting data (transmitter body and CAMPac) are memorized in memory elements that do
not require a back-up battery. Therefore, the data can be used while ignoring the back-up
battery life. Of course, the setting data is not destroyed even when the transmitter battery is
replaced.
95


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 8UAPS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 8UAPS in the language / languages: English as an attachment in your email.

The manual is 4,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info