Manual Futaba 8UAPS (page 91 of 105) (English)

29001

Zoom out

Zoom in

1/105

The inverted cross position function sets the point at which low-side pitch is

crossed when switching between forward and inverted. It is commonly set to a value

of 30%.

Entering Inverted Cross Position

REVOLU

function

To TH-NDL

function

Data input keys

These keys are used to move

through the two submenus in

the INVERT function.

2. Cross point setting

Enter your desired cross point value

with the (+)/(-) keys.

You may return to the initial value of

30% by pressing the (+)/(-) keys

simultaneously.

Current cross point setting

Range: 0 to 50%

(Initial value: 30%)

1. Activate Invert Cross Function

Press the (+) key to activate the INVERT CRSS function

("ON" or "OFF" will be displayed, depending on the Invert

switch H's position). Use the (-) key to INH

ibit the mixer.)

Revolution mixing is used to mix pitch→rudder to suppress the torque reaction

generated by changes in the pitch and speed of the main rotor. The mixing ratio can

be set by a five-point curve.

Three are three kinds of revolution mixing: normal (NORM), idle-up 1 (IDL1),

and idle-up 2 (IDL2). Only basic NORM revolution mixing is displayed in the Basic

Menu, but all the revolution curves are visible in the Advance Menu. If you program

the normal curve in the Basic Menu, the same curve is automatically reflected in the

REVOLU NORM menu within the Advance Menu, and vice versa.

The REVOLU functions for the IDL1 and IDL2 curves will not operate until the

OFST-1 and OFST-2 functions are activated.

These two functions set the mixing rate so that the fuselage direction is straight

ahead during high-speed flight. You can set either a curve or offset position to

match the helicopter’s tendencies. You may also program in reverse rudder mixing

for 3D flight.

Example Revolution-Norm

Five-point Curve

+100%

+50%

-50%

-100%

LOW

←

throttle stick

→

←

Servo Response

→

12345

Curve Point

10%

-20%

-33%

13%

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 8UAPS in the language / languages: English as an attachment in your email.

The manual is 4,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Futaba 8UAPS Manual

Product: