29001
90
Zoom out
Zoom in
Previous page
1/105
Next page
86
The Throttle
Needle mixing function is used to control the engine’s mixture using a 5-
point curve relative to throttle stick movement . The engine must be equipped with a
mixture control system, such as needle control or some other mixture adjustment, and the
needle servo must be plugged into CH8. The CH8 knob may be used for High-side mixture
adjustment when the idle-up (IDLE) function is ON.
You can have independent control of throttle
needle mixing in both the Normal
(NORM) and idle-up (IDLE) conditions. The TH
NDL function includes an ‘acceleration’
function that precedes rapid throttle opening and provides the engine with the best mixture.
Setting ThrottleNeedle Mixing
function
To GOVrpm
function
Curve Name
Display
(NORM
or IDLE)
Data input keys
These keys are used to
move around in the
TH-NDL function.
1. Turn the TH-NDL function ON
by pressing the (+) key ("ON"
displayed). Turn off (INH) the
function with the (-) key.
2. Input 5-point curve values
Move the lower arrow to the
position you want to set with the
CURSOR keys (the curve point is
indicated by the arrow below the
numbers 1-5, and the current
throttle position is above the
numbers). Enter the desired curve
value with the (+)/(-) keys.
• If you're unhappy with what you've
set, you may return to the default
value by pressing the (+) and (-)
keys simultaneously.
Initial values:
POS1 = 0%
POS2 =25%
POS3 = 50%
POS4 = 75%
POS5 = 100%
Curve Point
Value
(Range: 0 -
+100%)
Move between the TH-NDL
NORM and IDLE screens
with the (
)(
) keys.
The bottom arrow shows the point on
the five-point curve currently being set.
The blinking item on the
setting screen is the
current setting item.
Top arrow indicates the
current stick position (2
arrows means it's
between points)
Curve points 1-5
To INVERT or
TH-NDL NORM
Acceleration amount
Range: 0 to 100%
(Initial value: 0%)
3.Acceleration function setting
Enter the desired acceleration value with the (+)/(-) keys.Return to
a 0 % value by pressing the (+)/(-) keys simultaneously.
Acceleration is only mixed in when the throttle is moved towards
High. If Throttle Hold is activated, the needle servo moves and
acceleration is performed even though the throttle servo is fixed.
Idle-up functions are performed when the throttle curve idle-up
function is ACTivated.
90


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 8UAPS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 8UAPS in the language / languages: English as an attachment in your email.

The manual is 4,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info