29001
81
Zoom out
Zoom in
Previous page
1/105
Next page
77
You can use Throttle Curve menus to program a five-point curve so that the
engine speed responds the way you like relative to movement of the throttle stick.
You can set each of the five points over a 0% to 100% range.
There are three throttle curves: normal (NORM), idle-up 1 (IDL1), and idle-up 2
(IDL2). Only the basic normal throttle curve is displayed in the Basic Menu, but all
the curves may be programmed in the Advance Menu. For your convenience, the
normal curve can be programmed in either the Basic or Advance Menu, and it is
automatically updated in both places. Switch G is programmed so that you may
change between the normal (NORM), idle-up 1 (IDL1), and idle-up 2 (IDL2) curves.
The normal throttle curve (TH-CRV NORM) function is used to produce the basic
throttle curve for flight near hover. It is used along with the normal pitch curve (PI-
CRV NORM) so that the helicopter flies with constant rotor RPM. The normal
throttle curve function is ON at startup.
The idle-up curves should be programmed so that the engine maintains constant RPM
even when the pitch is reduced during flight. The curves should be matched to loops,
rolls, and other maneuvers, and are divided into idle-up curve 1 and idle-up curve 2.
The TH-CURV functions for IDL1 and IDL2 curves will not operate until the OFST-1
and OFST-2 functions are activated.
LOW throttle stick HI
100
75%
50%
25%
0%
Servo Response
LOW throttle stick HI
100
75%
50%
25%
0%
Servo Response
Throttle Curve IDL1 Example
Throttle Curve IDL2 Example
Throttle Curve Norm Example
LOW throttle stick HI
100
75%
50%
25%
0%
Servo Response
12345
Curve Point
70%
50%
30%
0%
75%
50%
75%
68%
68%
71%
55%
60%
12345
Curve Point
12345
Curve Point
81


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 8UAPS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 8UAPS in the language / languages: English as an attachment in your email.

The manual is 4,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info