28989

Futaba 6XA Manual

48
Zoom out
Zoom in
Previous page
1/64
Next page
3. If you are sure you wish to copy the current memory contents into the destination memory,
press both DATA INPUT keys simultaneously again. This carries out the copy function and
overwrites the destination memory. A beep indicates that copying is complete.
TMEM — Trim Memory
The trim memory function is one that you will find extremely useful. It is used after the
model is trimmed out and flying the way you like. Unless you build perfectly, after test flying
and trimming one or more of the trim tabs will be off-center. This is not a problem if you are
only flying one model with the transmitter and you never accidentally move one or more of the
trim tabs, but if you have several models in memory or do accidentally move on or more of the
tabs, all the trims could be different. The trim memory function solves this problem by
memorizing the trim tab positions needed for each model in memory.
When the trim memory function is executed, the trim position is now reproduced when
the trim tabs are moved back to their center position. If the model memory is changed, whenever
that model number is recalled, the original trims are reproduced if the trim tabs are centered.
This means that you never have to worry about where the trim tabs were with the model, the
transmitter keeps track of that information.
Note that the trim levers perform a different function than the subtrims. Subtrims affect
the position the servos are commanded to, the receiver OUTPUTS. Trims affect the transmitter
inputs. (As an example, if you have dual aileron servos and the flaperon function active, aileron
trim moves BOTH servos, but subtrim only affects the individual servo being adjusted.)
Memorizing Trim Positions
1. Press on the (+) or (–) MODE buttons until TMEM appears in the window.
2. With the trim tabs in the desired position, simply press both DATA INPUT
keys at the same time, and a beep-beep sound indicates that the trim
positions have been stored.
3. Now you must move the trims back to their neutral position to get the previous trim
locations. Move the tabs until you feel the detent at each one’s center. If you do this with
each of the models stored in memory, you will know the model is trimmed when the trims
are centered. The throttle trim position is not memorized, so you can always use the trim to
shut the motor off.
Resetting Trim Memory:
If you want to zero out the trim memory, go to the TMEM menu, and observe the marks over
or under the channel numbers 1 2 4. If the trim memory has a non-zero value (meaning you
memorized a trim setting), a little triangle will appear over the corresponding channel. Now
– 43 –
… 48 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 6XA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 6XA in the language / languages: English as an attachment in your email.

The manual is 1,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Futaba 6XA

Futaba 6XA User Manual - Spanish - 55 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info