28989
47
Zoom out
Zoom in
Previous page
1/64
Next page
3. If you are sure you wish to choose a new model type, press both DATA INPUT keys
simultaneously again. This resets the model type and erases the memory. The model type
letters will stop flashing to indicate the changed model type.
MOD
Modulation Select (PARA sub-function)
The Modulation menu is used to select the PCM or PPM mode of transmission, to match the
receiver being used (PCM = Pulse Code Modulation, and PPM = Pulse Position Modulation,
also called FM for Frequency Modulation). The T6XA/XH system ships with a PPM receiver,
but if you also will be using a PCM receiver, you should select the PCM mode for that receiver.
Note that you have to turn your transmitter on and off before a modulation change becomes
effective.
Changing your transmitter’s modulation
1. Press on the MODE buttons until the MOD window appears.
2. To select PCM modulation, press the (+) DATA INPUT key. The letter C is
displayed. To select PPM modulation, press the (–) DATA INPUT key.
The letter P is displayed.
3. To get the transmitter to operate in the new mode, switch transmitter power off and then on.
The small indicator will indicate the new mode, either PPM or PCM.
COPY — Copy Model
The
COPY
function is used to copy the current model data into another model memory.
This function is handy to use to start a new model that’s similar to one you have already
programmed, and is also handy for copying the current model data into another model memory
as a backup.
Copying from one model memory to another
1. Press on the MODE buttons until the COPY window appears.
2. The source model memory (the memory that will be duplicated)
is the current one. To select your destination model number,
press the (+) or (–) DATA INPUT keys. The selected destination memory number will flash on
and off, and a small triangle will appear under it.
Source
Destination
3. Press the CURSOR key, and the word SET? appears blinking on and off in the display. If you
do not wish to reset the data, press the CURSOR key or a MODE key or return to the regular
window.
– 42 –
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 6XA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 6XA in the language / languages: English as an attachment in your email.

The manual is 1,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Futaba 6XA

Futaba 6XA User Manual - Spanish - 55 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info