28983
8
Zoom out
Zoom in
Previous page
1/24
Next page
8
8
Current model
Current model
memory name
memory name
Modulation
Modulation
indicator
indicator
Transmitter
Transmitter
battery voltage
battery voltage
Current model
Current model
memory number
memory number
LCD display screen
LCD display screen
When the transmitter is initially
initially
turned on, the model memory number
model memory number
,
model memory name
model memory name
, modulation type
modulation type
and transmitter battery
transmitter battery
voltage
voltage
are displayed on the LCD screen. When prompted by the user,
the functions and settings stored in the memory can also be read on the
screen. The user accesses the different functions using the MODE and
SELECT keys and changes the values and settings using the DATA
INPUT lever. (This is called programming!)
Note:
Note:
Feel free to explore by scrolling through the programs and viewing the displays using the MODE and SELECT keys.
The MODE and SELECT keys only determine what will be displayed on the screen and will not change any of the
settings. Only when using the DATA INPUT lever will you be able to change any of the settings.
Note:
Note:
Charging your batteries with the included Futaba A/C battery charger is always safe. However, fast-charging with an
aftermarket charger is acceptable as long as you know how to properly operate the charger. NEVER
NEVER
charge at a rate
higher than 1,000 mAh (1 Amp). If not done correctly, fast-charging can damage the batteries.
called
memory. If, for example, only two flights are made each time you go flying, the batteries will not have reached
very far down into their full capacity. After doing this several times the batteries will
remember and eventually think
they can supply only enough power for two flights. After two flights the batteries may not provide enough power to
operate the system, thus causing a crash. To erase any potential memory, cycle the batteries by discharging, then
charging them with a commercial battery cycler, or leave the system on and exercise the servos by moving the
transmitter sticks until the servos are moving very slowly, indicating that the battery is discharged. Cycling should be done
every one to two months, even during the winter or periods of long storage. If using a cycler with a readout, note the
capacity after the batteries have been cycled. If there is a noticeable drop in capacity the batteries should be replaced.
LIQUID CHIP DISPLAY (LCD) & PROGRAMMING CONTROLS
LIQUID CHIP DISPLAY (LCD) & PROGRAMMING CONTROLS
To open
programming menu;
Press both keys
simultaneously and
hold for one second
MODE key - use to select desired
function while programming
Throttle-cut button -
To use the throttle-cut
function,
SELECT key - use to select items within
function to be set or changed in the screen
DATA INPUT lever - use this lever to input
numbers or settings
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 6EXAP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 6EXAP in the language / languages: English as an attachment in your email.

The manual is 2,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info