28983
4
Zoom out
Zoom in
Previous page
1/24
Next page
Aileron, Elevator & Rudder
dual rate switch
Antenna
Retractable landing
gear switch / CH.5
Flap control
dial / CH.6
Carrying handle
Liquid-crystal display
screen (LCD)
Throttle/rudder
control stick
MODE key
SELECT key
Trainer switch
Neck strap hook
Charging jack
On-off switch
Rudder trim
lever
Throttle trim
lever
DATA INPUT lever
Aileron trim lever
Elevator trim lever
Aileron/elevator
control stick
4
throttle cut
button
INTRODUCTION TO THE 6EXAP SYSTEM
INTRODUCTION TO THE 6EXAP SYSTEM
IMPORTANT!:
IMPORTANT!:
Always turn on the transmitter first, then the receiver. When turning off the system, always turn off the receiver
first. The object is never to have the receiver on by itself. Otherwise, the servos or control surfaces could be damaged, or in
the case of electric-powered models, the motor may unexpectedly turn on causing severe injury.
IMPORTANT!:
IMPORTANT!:
Never collapse the transmitter antenna by pushing down from the top. If one of the segments becomes momentarily
stuck you may damage the antenna. Instead, collapse the antenna from the bottom, drawing in one segment at a time.
Transmitter
Transmitter
Transmits in both FM (PPM) and PCM by selecting modulation/cycling transmitter. Requires receiver of proper modulation. The
liquid-crystal display (LCD) on the face of the compact, ergonomically-designed case is easy to read and allows rapid data input.
The system also holds independent memories for six different models. The new, adjustable-length control sticks provide an
improved feel. External switches operate dual rates (D/R), landing gear, and trainer cord or buddy-box capabilities. Programming
features include servo reversing and E.P.A on all channels, dual rates, exponentials and programmable mixing. Additionally, any
one of four, factory-set, preprogrammed
wing-type mixers including flaperon, V-tail, elevon mixing may be selected.
Transmitter controls
Transmitter controls
The diagram and explanations briefly describe the functions of the Futaba T6EXAP transmitter. Full instructions on how to
operate the controls are provided beginning on page 9.
NOTE:
NOTE:
The diagram shows a Mode 2 system as supplied. (More on flight modes on page 21).
DESCRIPTIONS:
DESCRIPTIONS:
Aileron, Elevator and Rudder dual rate switch
Aileron, Elevator and Rudder dual rate switch
Use this switch to flip” between two aileron, elevator and rudder control throw settings. The throws can be set up however you
prefer, but generally, when the switch is up” the throws are greater (high rate) and when the switch is “down” the throws are less
(“low rate”). This switch also flips between exponential rates (if used).
Flap control dial/Channel 6 -
Flap control dial/Channel 6 -
This dial operates the servo connected to channel 6 in the receiver if your model has flaps this is
the control used to operate them.
Neck strap hook -
Neck strap hook -
Mounting point for optional neck strap.
Aileron/elevator control stick -
Aileron/elevator control stick -
Operates the servos connected to channel 1 (aileron) and channel 2 (elevator) in the receiver.
Trim levers (all) -
Trim levers (all) -
Used to shift the neutral or center position of each servo as labeled in the diagram.
NOTE:
NOTE:
The throttle trim lever is intended for fine tuning the throttle servo when the engine is at idle. Throttle trim does
not affect the throttle servo when the throttle control stick is all the way up (so idle r.p.m. can be adjusted without
affecting throttle settings through the rest of the stick movement).
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 6EXAP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 6EXAP in the language / languages: English as an attachment in your email.

The manual is 2,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info