747925
93
Zoom out
Zoom in
Previous page
1/128
Next page
93
Function
ESC Link Function "MC LNK"
a
-Select the setting item "MODE" using the (JOG) button,
and select "READ" by (+) or (-) button.
b
-Select the setting item
"
EXEC:+/-
"
using the (JOG) but-
ton, and press the (+) and (-) buttons simultaneously for 1
second or longer.
-"COMPLETE!" blinks on the screen and the ESC type and currently set con-
tents are read.
- If "LINK ERROR" blinks on the screen, communication with the amp is not
being performed normally. Check the T4GRS and ESC connection and the
battery connection to ESC and the ESC power switch and repeat steps a
b.
3
(Writing to ESC)
Execute this function to write the setting data to ESC.
a
-Select the setting item
"
MODE
"
using the (JOG) button,
and select
"
WRITE
"
by (+) or (-) button.
b
-Select the setting item
"
EXEC:+/-
"
using the (JOG) but-
ton, and press the (+) and (-) buttons simultaneously for 1
second or longer.
-"COMPLETE!" blinks on the screen and the setting data is written to ESC.
If "LINK ERROR" blinks on the screen, communication with the amp is not
being performed normally. Check the T4GRS and ESC connection and the
battery connection to ESC and the ESC power switch and repeat steps a
b.
In addition, if (NO DATA) is displayed on the T4GRS screen, "WRITE" can-
not be selected because there is no setting data to be written.
- Different type ESC data cannot be written. If writing is attempted, "TYPE
ERROR" will link on the screen to show that the ESC type is wrong.
4
(Initialization)
This function writes the MC setting data set at the factory to
the connected MC and T4GRS. Perform "READ" before per-
forming initialization.
a
-Select the setting item "MODE" using the (JOG) button,
and select "RESET" with the (+) or (-) button.
b
-Select the setting item "EXEC:+/-" using the (JOG) but-
ton, and press the (+) and (-) buttons simultaneously for ap-
proximately 1 second
- "COMPLETE!" blinks on the screen and the initial data is written to the ESC.
If "LINK ERROR" blinks, communication with the amp was not performed
normally. Check the T4GRS and ESC connection and the battery connection
to ESC and the ESC power switch, and repeat steps a
b. In addition, when
(NO DATA) is displayed on the T4GRS screen "RESET" cannot be selected
because there is no written initial data.
93


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 4GRS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 4GRS in the language / languages: English as an attachment in your email.

The manual is 2,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info