747925
92
Zoom out
Zoom in
Previous page
1/128
Next page
Communication port
ESC receiver connector
Connecting ESC receiver
connector to the transmitter
Communication port
Connection diagram
92
Function
(Preparation)
-Connect the T4GRS and ESC in accordance with the connection
diagram, and connect the battery to ESC.
1
Set the transmitter power switch to the display side (DISP).
Display the MC LINK function screen in the above manner.
Using the ESC Link function
ESC Link Function "MC LINK"
This is a special function which lets you set the contents of the Link software in
Futaba speed controller (ESC), MC960CR, MC940CR, MC950CR, MC851C,
MC602C, MC402CR, etc, with variable frequency and other data changes at the
T4GRS transmitter. However, some data changes require a PC and Link software.
This function is used by connecting ESC directly to the transmitter. The T4GRS
power switch is set to the display side. Use the various optional servo extension
cords according to the distance between the transmitter and ESC. The last data read
from ESC to T4GRS or the last data written from T4GRS to ESC is saved to the
T4GRS. Since the data for each model memory can be saved, the data of up to 40
models can be saved.
-When the T4GRS battery voltage drops, the display switches to low battery display. Therefore, use this function when there
is ample battery capacity remaining.
-Also connect the battery at the ESC side.
-
Note:
Do not read to the T4GRS an MC940/960CR whose speed was set to over 99990rpm by Link software side Boost
Angle rpm setting.
ESC Link Function "MC LNK"
2
(ESC read)
Execute this function to read the connected ESC type and the data currently set at the
amp. To save the ESC data to the T4GRS, rewrite the read data.
When you want to write the data saved in the T4GRS to an ESC of the same type, ex-
ecute the following "WRITE"(write) without executing "READ"(read).
(MC LINK screen)
Pres
s
(DISP MENU screen)
Pres
s
Select
"
MC LINK
"
MC402CR MC602C MC851C MC950CR
MC960CR MC940CR
92


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 4GRS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 4GRS in the language / languages: English as an attachment in your email.

The manual is 2,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info