747924
18
Zoom out
Zoom in
Previous page
1/23
Next page
18
Throttle Trim
TRM-CH2
SUB Trim
CH1-CH4
Use this function to adjust the neutral
position of the steering, throttle and
channel 3 (4) servos.
Subtrim shifts the entire servo travel range
in the set direction.
Throttle neutral adjustments can
be made moving the throttle
trim up or down.
Racers Tip
When using an electronic speed control, set the throttle trim
to neutral and make adjustments to the speed control. On
a gas powered model, set the trim to neutral and adjust the
linkage to the point where the carburetor is fully closed in
accordance with the engine instruction manual.
Trim Operation and Maximun Travel
:LWKWKHFHQWHUWULPIHDWXUHWULPDGMXVWPHQWVKDYHQRH൵HFW
on the maximum servo travel. This prevents the linkages
from binding when adjustments are made.
When trim movement is extreme
If you use most of the trim movement to get the servo to the
neutral position, recenter the servo horn closer to the neutral
position and inspect your throttle linkage.
Throttle Trim
or
+
and - Press and hold
Trim change
Reset
Trim change
(F1000B100)
Press Trim
Reset
(Drum Type)
(Slide Type)
Carburetor Fully Closed
Channel-4 Trim
TRM-CH4
*It can't be used in R203GF.
*CH4 can't be used in R203GF.
At 4WS mixing function:
The neutral adjustments of
the rear steering servo can
be made by pressing the

key.
At brake mixing function:
The neutral adjustments of the front
brake servo can be made by pressing
the

key.
(This setting screen is displayed when 4WS mixing or Brake mixing is activated.)
Channel-4 Trim
(4WS mixing)
(Brake mixing)
+ and - Press and hold
Trim change
Reset
Select by key
SUB Trim
+
and - Press and hold
SUB Trim change
Reset
to 4
RightLeft
ForwardBrake
*CH4 setting screen is displayed when 4WS mixing
or Brake mixing is activated.
Steering Dual Rates
D/R
Use this function to adjust the steering
travel of your model. When the steering
angle is too large at over steering, decrease
the rate. The setup here is linked with
transmitter grip lever DT3. Adjustments
can be made at this screen even if DT3 is
assigned to another function.
DT3
D/R
or
+
and - Press and hold
Steering rate change
Reset (100%)
Press
Reset
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 3PV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 3PV in the language / languages: English as an attachment in your email.

The manual is 1,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info