28971
16
Zoom out
Zoom in
Previous page
1/22
Next page
14
Description of 2PL Functions
Throttle End Point Adjustment (EPA-CH2)
This function is used to adjust the
forward and brake side servo
travel. Each direction can be
adjusted independent of each
other. Use this feature to set the
throttle servo travel.
Be sure that your throttle linkage does not apply excessive force
to the servo.
If your linkage installation causes an unreasonable amount of force to
be applied to the servo, the servo may be damaged and result in loss
of control.
Steering End Point Adjustment (EPA-CH1)
Use this function to limit the servo
movement to the left or right. The
servo travel to each side can be in-
dependently adjusted. This feature
will compensate for any difference
in right or left turning angles or ra-
dius due to the characteristics of
your model.
Be sure that the steering linkage does not bind or come in
contact with any suspension parts or arms.
If unreasonable force is applied to the servo, the servo may be dam-
aged and result in loss of control.
Steering EPA
Adjust the travel of the servo
while operating the steering
wheel each way.
Range: 0 - 120%
(Left side) (Right side)
Throttle EPA
Adjust the travel of the servo
while operating the throttle
trigger each way.
Range: 0 - 120%
(Forward side)
(Brake side)
ABS function (ABS-CH2)
This function simulates a full size
car's antilock braking by pulsing
the brake on and off rapidly.
Model stops as rapidly as possible
without skidding.
ABS Cycle Speed
OFF: Inhibited
FST: Active (fast)
MID: Active (middle)
SLW: Active (slow)
ABS function
(Selection key)
Model Name (NAME)
Model Name
(Selection key)
(Selection key)
Model number
1 - 0
Model name
This function provides a 3-charac-
ter name for each of the model
memories in the transmitter to
easily select the correct setup for
the model currently in use.
•Clearly label each model for easy
selection.
Warning
Warning
•The cycle speed can be selected from FST/MID/SLW.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 2PL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 2PL in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info