28971
14
Zoom out
Zoom in
Previous page
1/22
Next page
12
Description of 2PL Functions
Description of 2PL Functions
Steering Trim (TRM-CH1)
Throttle neutral adjustments can be made moving the throttle
trim to the left or right.
Racers Tip
When using an electronic speed control, set the throttle
trim to neutral and make adjustments to the speed control.
On a gas powered model, set the trim to neutral and adjust
the linkage to the point where the carburetor is fully closed
in accordance with the engine instruction manual.
Trim Operation and Travel
Trim adjustments will affect the overall servo travel.
Check the brake side (backward) movement when changes
are made.
When trim movement is extreme
If you use most of the trim movement to get the servo to the
neutral position , recenter the servo horn closer to the neutral
position and inspect your throttle linkage.
Throttle Trim (TRM-CH2)
Steering neutral adjustments can be made by moving the Steer-
ing trim knob to the left or right.
Racers Tip
When you install a servo, always check to be sure the
servo is at its neutral position. Adjust the servo horn hole
position and linkage so both are parallel. When a servo
saver is used, place it as close to center position as pos-
sible. Be sure the steering trim on the transmitter is at the
neutral position.
Trim Operation And Maximum Travel
Changing the trim can affect the overall settings. When
adjustments are made with the trims, recheck your installa-
tion for maximum travel. (Steering EPA right side and left
side).
When Trim usage is extreme
If it takes most of your trim movement to get a servo to the
neutral position, reposition the servo horn or servo saver on
the servo and inspect your linkage installation.
90° 90°
Parallel
Servo Saver
Direct Servo Saver Horn
L25 - 0 - R25
Steering Trim
(Drum Type)
(Slide Type)
Carburetor Fully Closed
B25 - 0 - F25
Throttle Trim
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 2PL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 2PL in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info