29031
103
Zoom out
Zoom in
Previous page
1/127
Next page
Return to Model Menu
Motor
[Corresponding model type]: EP glider, general
This function lets you set the operation speed
when the motor of a F5B or other EP glider is
started by switch. The operation speed can be set
in 2 ranges of slow speed flight and high speed
ight (Speed 1/Speed 2). This function can also be
operated as a safety function by setting 2 switches.
The In side and Out side operating speeds can
be adjusted independently in 2 ranges (Speed
1/Speed 2).
The boundary between the 2 ranges can be set.
(From Speed 1 to Speed 2)
The set operation speed operation can be
activated at initial operation only. (1 time
operation) However, operation can be repeated
Touch the [Motor] button in the Model Menu
to call the setup screen shown below.
Move the cursor by set
switch or VR.
by setting the switch to OFF before operation is
nished. When you want to reset 1 time operation,
set the ACT button to [INH] and then reset it to
[ON].
The motor (CH3) is controlled by SW-G. (Initial
setting) When changing the switch or stick which
controls the motor, rst change Function of the
Linkage Menu.
Note: When using this function, always check initial
operation with the propeller removed.
Operation
Touch the button and set the function to ON.
When you want to set the "One time mode",
touch the button and set the mode to [ON].
Speed 1 to 2
The Speed 1 and Speed 2 region boundary
can be changed,
Operation speed adjustment
The speed when Speed 1 and Speed 2 are
ON (In) and OFF (Out) can be adjusted.
Operation
Touch the button and set the function to
ON.
Group/single mode switching (Gr./Sngl)
(For more information, see the description
at the back of this manual.)
Switch
A switch that turns the function itself
ON/OFF can be selected.
Motor off
[Yes] and [No] are displayed by touching
the Motor Off button when [SW-G] is in
the motor OFF position. When [Yes] is
touched, the direction of the motor switch
is memorized. The screen graph display ON
direction also changes.
Notes
First decide the motor OFF point, and then set the speed. When you want to
reset the motor OFF point, also reset the speed.
We recommend that Motor OFF be set in combination with F/S.
Set the basic operation direction with the Reverse function to match the
amp used.
Always set the Motor OFF position.
103
<Model Menu (Airplane/Glider Functions)>
103


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 14MZ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 14MZ in the language / languages: English as an attachment in your email.

The manual is 21,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info