29031
67
Zoom out
Zoom in
Previous page
1/127
Next page
Return to Linkage Menu
Touch the [Swash] button in the Linkage Menu to
call the setup screen shown below.
Swash
Swash operation linkage correction function.(helicopter only)
Neutral Point
At your linkages, if the servo horn deviates
from a perpendicular position at neutral, the
linkage compensation functions in this menu
may not compensate effectively. To correct
this use the Hovering Point function. This will,
move the neutral point of the servos to the actual
perpendicular position. However, this adjustment
changes only the datum point of the compensation
functions in this menu, and does not affect the
neutral position of other functions.
Neutral point setting procedure
*Before using the correction function, set the neutral point.
*Adjusting the servo horn so that the neutral point is near the
50% position makes the mixing amount small.
1. Hold the servo horn at a right angle to the
linkage rod, and then touch the [Enter]
button and read the actual neutral position.
*The neutral position is displayed on the screen.
After reading the neutral point, use the
other correction functions to make further
adjustments.
To exit the setting, touch the [Swash] button.
Swash AFR
Swash AFR function reduces/increases/reverses
the rate (travel) of the aileron, elevator and
collective pitch functions, by adjusting or reversing
the motion of all servos involved in that function,
only when using that function. Since H-1 uses one
servo for each function, there is no need for Swash
AFR in H-1.
Swash AFR setting procedure
1. Touch the button of the AFR rate to be
adjusted. Adjustment buttons appear on the
screen.
2. Use these buttons to adjust the AFR rate.
Initial value: +50%
Adjustment range: -100%~+100%
To exit the setting, touch the [Swash] button.
To Swash
Details screen
67
<Linkage Menu>
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Futaba 14MZ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 14MZ in the language / languages: English as an attachment in your email.

The manual is 21,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info