Manual Futaba 14MZ (page 65 of 127) (English)

29031

Zoom out

Zoom in

1/127

●Return to Linkage Menu

● Touch the [Throttle Cut] button in the Linkage Menu

to call the setup screen shown below.

Throttle Cut

Stops the engine safely and easily.(airplane and helicopter only)

(The display screen is an example. The screen depends on the model type.)

Throttle cut provides an easy way to stop the

engine, by ﬂ ipping a switch with the throttle stick

at idle. The action is not functional at high throttle

to avoid accidental dead sticks. The switch’s

location and direction must be chosen, as it defaults

to NULL.

Throttle cut setting procedure

1. Touch the "INH" button to activate the

Throttle Cut function.

2. Throttle cut function switch setting:

Touch the "NULL" button to call the <Switch>

screen, and then select the switch and its ON

direction.

(For a detailed description of the selection

method, see [Switch Setting Method] at the

back of this manual.)

3. Throttle cut position setting:

Set the throttle stick to maximum slow, and

touch the Cut Position button. Adjustment

buttons appear. At the same time, the

numerical value of the current maximum

slow side is displayed at "Cut Position".

Use the adjustment buttons to adjust the

servo travel when the throttle cut function is

activated.

●Initial value: 17%

●Adjustment range: 0%~50%

*With throttle stick at idle, adjust the rate until the engine

consistently shuts off, but throttle linkage is not binding.

When ﬁ nished, touch the “Throttle Cut” button to exit.

To exit the setting, touch the [Throttle Cut]

button.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Futaba 14MZ in the language / languages: English as an attachment in your email.

The manual is 21,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Futaba 14MZ Manual

Product: