691366
15
Zoom out
Zoom in
Previous page
1/20
Next page
2
Select an option:
If the stereo is connected using an Ethernet cable, select
ETHERNET IP > STATIC IP.
If the stereo is set as a wireless access point or wireless
client, select WI-FI STATIC IP.
3
Select an option:
To set the IP address, select IP, and enter the IP address.
To set the subnet mask, select MASK, and enter the
subnet mask.
NOTE: The subnet mask must match all other devices on
the network to work properly. A typical subnet mask is
255.255.255.0.
To set the default gateway IP address, select GATEWAY,
and enter the gateway IP address.
NOTE: The default gateway is typically set as the IP
address of the DHCP server on the network.
4
Select SAVE.
Resetting Network Settings
You can reset all network settings for this stereo to the factory
default values.
Select > > NETWORK > RESET > YES.
Update Options
Select > > UPDATE.
NOTICE
Do not turn off the stereo or disconnect the power during a
software update. Turning off the power during a software update
may cause the stereo to become unresponsive.
NOTE:
When possible, you should perform device updates using the
FUSION-Link app on a smartphone connected to the same
network as the stereo. You should use a USB flash drive only
if necessary.
The stereo may restart a few times when updating. This is
normal.
You can program only newer versions of software on the
stereo.
STEREO: Updates the stereo using a valid software update file
on a connected USB flash drive.
NRX REMOTE: Updates an optional NRX remote connected to
the NMEA 2000 port or NMEA 2000 network using a valid
software update file on a connected USB flash drive.
DAB MODULE: Updates an optional DAB module connected to
the SIRIUS XM port using a valid software update file on a
connected USB flash drive.
FACTORY RESET: Restores all settings to the factory default
values.
Additional Stereo Control Options
FUSION-Link Remote Control App
You can use the FUSION-Link remote control app on your
compatible Apple or Android device to adjust the stereo volume,
change the source, control playback, select and manage radio
presets, and adjust some stereo settings.You can use the app to
set up and configure DSP profiles on the stereo.You can use the
app to update the stereo software wirelessly
The app communicates with the stereo using a wireless
connection to the mobile device. You must connect your
compatible device to the stereo using Bluetooth or WiFi
technology to use the app.
If the stereo is connected to a network with a WiFi access point,
the app can communicate with the stereo using the network for
greater range than a Bluetooth connection.
NOTE: You must connect the app using a WiFi connection to
update the stereo software wirelessly. You cannot update device
software using a Bluetooth connection.
For information about the FUSION-Link remote control app for
compatible Apple or Android devices, go to the Apple App
Store
SM
or the Google Play
store.
FUSION-Link
Network Technology
FUSION-Link network technology allows you to fully control
compatible FUSION entertainment systems on compatible multi-
function displays installed at the helm, flybridge, or navigation
station of the vessel. This provides integrated entertainment
control and a less cluttered console.
The partnered multi-function display becomes the portal on
which you can control all audio on the vessel, no matter where
on the vessel the connected stereo is installed. The FUSION-
Link equipped stereo can be installed out of sight if space is an
issue and users need to access the stereo only to replace
removable media.
FUSION-Link technology on this device can communicate using
existing industry-standard network connections including
Ethernet and WiFi wireless technology.
FUSION-Link technology offered on this device can
communicate using existing industry-standard NMEA 2000
networks.
For a list of FUSION-Link capable products from companies
partnered with FUSION, go to www.fusionentertainment.com.
NMEA 2000 Remote Control and Display
The stereo can be controlled by compatible FUSION wired
remote controls installed in the audio zones throughout the
vessel. Operating the entertainment system from the remote
control is similar to operating it from the main stereo.
FUSION wired remote controls operate over an existing NMEA
2000 network, so wiring the remote controls directly to the
stereo is not necessary. All remote controls connected to the
same NMEA 2000 network as the stereo can control the stereo.
If your vessel does not have a NMEA 2000 network, you can
directly connect a single FUSION remote control or create a
FUSION remote control network to connect multiple FUSION
wired remote controls directly to the NMEA 2000 connector on
the stereo. See the installation instructions provided with your
stereo and remote for more information.
The FUSION wired remote control can also serve as an NMEA
®
display showing NMEA navigation data or vessel performance
data from other NMEA devices on an existing NMEA 2000
network. See the instructions provided with your remote control
for information on supported NMEA 2000 PGN information.
Configuring an Optional Wired Remote
NOTICE
The stereo is configured by default to work with a NMEA 2000
network, and the NRX POWER option should be enabled only
when an optional remote is connected directly to the stereo.
Enabling this option when the stereo is connected to a NMEA
2000 network may damage other devices on the NMEA 2000
network.
If you connect an optional wired NRX remote directly to the
stereo, and not through a NMEA 2000 network , additional
configuration is needed.
1
Select > > NMEA.
Additional Stereo Control Options 11
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fusion Apollo RA770 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fusion Apollo RA770 in the language / languages: English as an attachment in your email.

The manual is 2,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fusion Apollo RA770

Fusion Apollo RA770 User Manual - German - 22 pages

Fusion Apollo RA770 Installation Guide - Dutch - 8 pages

Fusion Apollo RA770 User Manual - Dutch - 20 pages

Fusion Apollo RA770 User Manual - French - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info