691366
13
Zoom out
Zoom in
Previous page
1/20
Next page
The source icon is in the lower-left corner of the stereo
screen, and shows the source that is currently playing.
2
Select PARTYBUS
TIP: You can press and hold the source icon to show
available FUSION PartyBus devices.
The device shows a list of available FUSION PartyBus
devices on the network.
3
Select the device you want to stream from.
The stereo begins streaming the same source as the connected
FUSION PartyBus device, and a green border appears around
the device screen. All media playback functions affect both
devices.
Stopping Streaming from a FUSION
PartyBus Device on the Network
If you are streaming from a FUSION PartyBus device on the
network, you must disconnect from the device before you can
play local sources on the stereo.
1
Select the source icon.
The source icon is in the lower-left corner of the stereo
screen, and shows the source that is currently playing.
2
Select PARTYBUS > LEAVE PARTYBUS.
TIP: You can press and hold the source icon to quickly leave
the FUSION PartyBus network.
Network UPnP Playback
This stereo can play content from Universal Plug and Play
(UPnP) devices connected to the network, such as computers
and media servers. You must connect your UPnP device to the
same network as the stereo using a wired or wireless
connection, and you must configure the device to share media
over the network. See the owner's manual from your UPnP
device for more information.
After you have connected your UPnP device to the network and
configured it to share media, the UPnP source appears on the
source selection screen of each stereo on the network
(Selecting a Source, page 1).
General Settings
Select > .
NOTE: When an check box is filled, the option is on. When the
check box is clear, the option is off.
ZONE: Enables you to configure the speaker zones (Speaker
Zone Settings, page 9).
BRIGHTNESS: Adjusts the screen and dial backlight brightness
(Adjusting the Backlight and Dial Brightness, page 2).
TUNER REGION: Sets the region used by the FM, AM, DAB,
and SiriusXM sources.
LANGUAGE: Sets the language on the device.
DEVICE NAME: Sets a name for this stereo.
TELEMUTE: Sets the behavior of the mute function when the
device is connected to a hands-free mobile phone. When a
call is received, the device can either mute the audio or
broadcast the call through the Aux1 input. See your hands-
free kit instructions.
SEARCHING: Enables FUSION Alpha Search Technology
(FAST), which allows you to quickly search for tracks by letter
or number. You can select a number to enable the FAST
menu if your music device contains more than the selected
number of items.
AirPlay PASSWORD: Sets a password that a user must enter
when connecting to the stereo using the AirPlay feature
(Setting an AirPlay Password, page 3).
POWER OPTIONS: Adjusts power settings, such as the power-
save mode (Power Options, page 9).
PARTYBUS SETTINGS: Sets the sources the device can
stream over the FUSION PartyBus network. You may want to
disable some sources, such as OPTICAL, because streaming
over the network introduces a small audio lag that is not
desirable in some situations.
NETWORK: Enables you to configure the device network
settings (Network Configuration, page 10).
UPDATE: Updates the stereo or connected devices (Update
Options, page 11).
ABOUT: Shows the software version information for the stereo.
Speaker Zone Settings
Setting a Zone Name
You can set a name for a speaker zone to make it easier to
identify.
1
Select > > ZONE.
2
Select a zone.
3
Select ZONE NAME.
4
Use the on-screen keyboard to enter a name, and select .
Linking Zones
You can link zones 1 and 2 to keep the volume levels
synchronized. Adjusting the volume of either of the linked zones
affects both zones.
Select > > ZONE > ZONE 2 > LINK TO ZONE 1.
When zones 1 and 2 are linked, appears on zones 1 and 2 on
the volume screen.
NOTE: After zones 1 and 2 are linked, you cannot adjust the
volume of each zone individually.
Enabling Volume Control of Zone 3 or 4 from a
Connected Amplifier
By default the volume of zones 3 and 4 are controlled by the
stereo. You can control the volume of these zones using the
connected amplifier instead.
1
Select > > ZONE.
2
Select zone 3 or zone 4.
3
Select VOLUME CONTROL to clear the check box.
The audio signal from the zone is provided to the amplifier as a
fixed-line-level output.
Disabling a Zone
You can disable an unused zone and remove it from the audio
level pages. When a zone is disabled, you cannot change any of
the settings for that zone. You can disable zones 2, 3, and 4
only.
1
Select > > ZONE.
2
Select a zone.
3
Select ZONE ENABLED to clear the check box.
Disabling the Internal Amplifiers
If you do not connect speakers directly to zones 1 and 2, you
can disable the internal amplifiers to reduce power consumption.
1
Select > > ZONE.
2
Select INTERNAL AMP ON to clear the check box.
Power Options
Select > > POWER OPTIONS.
NOTE: When an check box is filled, the option is on. When the
check box is clear, the option is off.
POWER SAVE: Disables the LCD backlight after one minute of
inactivity to save battery power.
General Settings 9
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fusion Apollo RA770 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fusion Apollo RA770 in the language / languages: English as an attachment in your email.

The manual is 2,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fusion Apollo RA770

Fusion Apollo RA770 User Manual - German - 22 pages

Fusion Apollo RA770 Installation Guide - Dutch - 8 pages

Fusion Apollo RA770 User Manual - Dutch - 20 pages

Fusion Apollo RA770 User Manual - French - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info