Manual Fusion Apollo RA770 (page 7 of 20) (English)

691366

Zoom out

Zoom in

1/20

On your Apple device, open the music app you want to

stream to the stereo.

From the music app or program, select or , and select

the name of the stereo.

If necessary, start playing music on the app.

The stereo changes to the AirPlay source automatically and

plays audio from your Apple device.

NOTE: On some AirPlay devices, adjusting the volume on

the device affects the volume level on the stereo.

NOTE: You cannot stream the AirPlay source to other

stereos on the network using the FUSION PartyBus feature.

Setting an AirPlay Password

You can set a password that a user must enter when connecting

to the stereo using the AirPlay feature.

Select > > AirPlay PASSWORD.

Enter a password.

NOTE: The AirPlay password is case-sensitive.

When connecting to this stereo using the AirPlay feature, the

user must enter the password on their Apple device.

Connecting a UPnP Device

You must connect your stereo to a network, either wired or

wirelessly, to play media from a UPnP device, such as a NAS

device.

Connect your UPnP device to the same network as the

stereo, referring to the instructions provided with your UPnP

device and router if necessary.

Select the UPnP source on the stereo (Selecting a Source,

page 1).

You can browse and play media from the UPnP device the in

same way that you would from a USB flash drive (Controlling

Music Playback on a Connected Android Device, USB Flash

Drive, or Media Player, page 4).

Audio Control

Adjusting the Volume

Turn the dial to open the volume screen.

Select an option:

• Use the touchscreen to adjust the volume levels for each

zone.

• Use the dial to adjust the volume for the highlighted zone.

If necessary, press the dial to switch between zones.

TIP: To control all zones at the same time, you can press the

dial until GLOBAL is highlighted, or use the touchscreen to

adjust the GLOBAL zone.

Muting all Connected Stereos

You can quickly mute the audio from this stereo or from all

stereos connected to the network (FUSION PartyBus

Networking, page 8).

From any source, select .

The mute symbol appears and audio from this stereo is

silenced.

Select MUTE SYSTEM.

Audio from all connected stereos is silenced.

Select UNMUTE SYSTEM.

Audio is restored to all connected stereos.

Adjusting the Tones

Select > > ZONE.

Select a zone.

Select TONE.

Select an option:

• Use the slider bar to adjust the level of each tone.

• Press the dial to select a tone, and turn the dial to adjust

the level for the tone.

Disabling the Loud Setting for a Zone

The LOUD setting maintains frequency response at low volumes

and increases perceived loudness at high volumes. This setting

is enabled by default in all zones.

Select > > ZONE.

Select a zone.

Select LOUD to clear the check box.

Adjusting the Gain for an Auxiliary Device

You can adjust the gain for a connected auxiliary device to

achieve a volume level similar to that of other media sources.

You can adjust the gain in 1 dB increments. You can also adjust

the gain for digital sources using an optical audio connection.

Select an auxiliary source.

Select an option:

• To increase the gain, select .

• To decrease the gain, select .

NOTE: To achieve the best audio quality when using a

portable media player with headphone output, it may be

necessary to adjust the volume control on the media player,

instead of adjusting the gain.

Speaker Zones

You can group speakers in one area into a speaker zone. This

enables you to control the audio level of the zones individually.

For example, you could make the audio quieter in the cabin and

louder on deck.

You can set the balance, volume limit, tone, subwoofer level,

subwoofer frequency, and name for each zone, and configure

other zone-specific settings (Speaker Zone Settings, page 9).

Adjusting the Audio Settings for a Zone

Select > > ZONE.

Select a zone.

Select MORE.

Select one or more options:

NOTE: Not all options are available for all zones.

• To limit the maximum volume output of this zone, select

VOLUME LIMIT, and adjust the level.

• To set the subwoofer level for this zone, select SUB

LEVEL, and adjust the level.

• To adjust the right and left speaker balance of this zone,

select BALANCE, and adjust the balance.

Adjusting the Subwoofer Filter

You can use the subwoofer filter setting to control the subwoofer

cutoff frequency for each zone, which can enhance the blend of

the sound produced by the speakers and the subwoofer. Audio

signals above the selected frequency are not passed to the

subwoofer.

NOTE: If a DSP setting has been applied to zone, this setting

cannot be changed on the stereo. You can view the DSP setting

for the optimal cutoff frequency as calculated by the DSP

controller, but cannot adjust it.

Select > > ZONE.

Select a zone.

Select SUB FREQ.

Audio Control 3

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fusion Apollo RA770 in the language / languages: English as an attachment in your email.

The manual is 2,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fusion Apollo RA770

Fusion Apollo RA770 User Manual - German - 22 pages

Fusion Apollo RA770 Installation Guide - Dutch - 8 pages

Fusion Apollo RA770 User Manual - Dutch - 20 pages

Fusion Apollo RA770 User Manual - French - 22 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fusion Apollo RA770 Manual

Product: