Manual Fusion Apollo RA770 (page 6 of 20) (English)

691366

Zoom out

Zoom in

1/20

Source

Network status (Network Status Icons, page 12)

Album art (if available from a compatible source)

Track details (if available)

Elapsed time, track duration, and the current track number

out of the total number of tracks in the playlist (if available)

Source icon

Select to change the source (Selecting a Source, page 1).

Adjusting the Backlight and Dial Brightness

NOTE: If you connected the dim wire on the wiring harness to

the boat's illumination wire, the backlight and dial dim

automatically when the boat lights are on. This may affect how

you adjust the brightness setting.

Select > > BRIGHTNESS.

Adjust the brightness level.

Enabling Standby Mode

You can set the stereo to enter a low-power standby mode when

you turn off the ignition or hold . When you turn on the ignition

or press again, it takes less than the typical 30 seconds to

turn on.

NOTE: When the stereo is in low-power standby mode, it

continues to draw current from the battery. The maximum

current draw in standby mode is 110 mA.

Select > > POWER OPTIONS > STANDBY MODE.

The stereo now enters standby mode when you hold .

Media Player Connection

CAUTION

Always disconnect your media player from the stereo when not

in use and do not leave it in your vessel. This helps reduce the

risk of theft and damage from extreme temperatures.

Do not remove the media player or use your stereo in a

distracting manner while operating the vessel. Check and obey

all marine laws in association with use.

The stereo accepts a variety of media players, including

smartphones and other mobile devices. You can connect a

compatible media player using a Bluetooth

wireless connection

or a USB connection to the USB port. The stereo can play

media from Universal Plug and Play (UPnP) devices, such as a

Network Attached Storage (NAS) device connected to the same

network. The stereo can play media from compatible Apple

device connected to the same network using the AirPlay

feature.

USB Device Compatibility

You can use a USB flash drive or the USB cable included with

your media player to connect a media player or mobile device to

the USB port.

The stereo is compatible with iAP2 Apple devices such as the

iPhone

X, iPhone 8 Plus, iPhone 8, iPhone 7 Plus, iPhone 7,

iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6,

iPhone 5s, iPhone 5c, iPhone 5, and iPod touch

(5th and 6th

generation).

The stereo is compatible with Android

™

devices that support

MTP mode.

The stereo is compatible with media players and other USB

mass storage devices, including USB flash drives. Music on

USB drives must meet these conditions:

• The USB mass storage device must be formatted using the

FAT32 or NTFS file system.

• The music files must be formatted as MP3, AAC (.m4a), or

FLAC, files.

• If you connect a portable hard drive, you must connect it to

an external power source. The USB port on this stereo

cannot provide power for a portable hard drive.

Connecting a USB Device

You can connect a USB device to the USB port on the stereo.

Locate the USB port on the back of the stereo.

Connect the USB device to the USB port.

Select the USB source.

Connecting an Auxiliary Device

You can connect various auxiliary devices to the stereo. These

devices have either RCA connectors, a line output, or a

headphone output jack.

Locate the auxiliary connectors on the wiring harness.

If necessary, connect an RCA-to-3.5 mm adapter cable to the

auxiliary device.

Connect the auxiliary device to the AUX IN RCA connectors

on the wiring harness.

Select the Aux source.

Optical Audio Connection

You can connect devices with an optical audio output to the

stereo using an optical audio cable. Televisions, DVD players,

CD players, and other devices may supply digital optical audio

output.

This stereo supports PCM audio only. You may have to change

the settings on your device to output PCM audio.

NOTE: Because streaming audio over the FUSION PartyBus

™

network introduces a slight delay, streaming content from a

television or DVD player may not be ideal. You can disable

OPTICAL as a streaming source in the settings, if needed

(General Settings, page 9).

Connecting to a Garmin

Watch

For a list of a compatible Garmin watches, go to

www.fusionentertainment.com.

For more information about the watch, see the watch manual at

www.garmin.com/manuals.

Following the instructions in the watch manual, install the

FUSION-Link Lite

™

app from the Connect IQ

™

store onto the

watch.

On the stereo, select the BT source.

Select > DISCOVERABLE.

The stereo remains discoverable for two minutes.

Bring the watch within 3 m (10 ft.) of the stereo.

NOTE: Stay 10 m (33 ft.) away from other ANT

devices

while pairing.

Open the FUSION-Link Lite app on the watch.

The first time you open the app on the watch, the watch

automatically pairs with and connects to the stereo. If you

need to pair to another stereo, in the FUSION-Link Lite app,

select Settings > Pair new.

Control the audio playback using the FUSION-Link Lite app

on the watch.

After the devices are paired, they connect automatically when

they are turned on, within range, and the app is open on the

watch.

Connecting an Apple Device Using AirPlay

From the settings menu on your Apple device, connect to the

same wireless network as your compatible FUSION

stereo.

NOTE: You can connect some Apple devices to the network

using a wired Ethernet connection, if applicable. Go to the

Apple website for more information.

2 Getting Started

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fusion Apollo RA770 in the language / languages: English as an attachment in your email.

The manual is 2,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fusion Apollo RA770

Fusion Apollo RA770 User Manual - German - 22 pages

Fusion Apollo RA770 Installation Guide - Dutch - 8 pages

Fusion Apollo RA770 User Manual - Dutch - 20 pages

Fusion Apollo RA770 User Manual - French - 22 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fusion Apollo RA770 Manual

Product: