648605

Furuno WMB-3250 Wassp Manual

57
Zoom out
Zoom in
Previous page
1/62
Next page
Doc. P/N: WSP-009-004
Version: V1.3
Issue Date: August 2013
www.wassp.com
Page 57 of 62
Operator Manual
compensated for.
Roll Offset
– If there is a xed offset in the mounting of the transducer or Motion Sensor you will
need to conduct a patch test to determine this error. Without this the roll correction will not work
correctly.
7.9 Why does the seaoor move if the system is Motion Compensated?
The views are only compensated for Roll to save on processing time and to avoid creating
artefacts in the data. If the Sonar display is rotating then the Roll correction is not working.
Remember too that if the vessel is operating in a high sea state, your motion sensor may not be
able to fully compensate for the vessel’s movement.
► Check Roll Information is being
received (open the Diagnostics, click
Listen, and select the Sensor tab).
You should see a moving orange line
on this display if the Roll information
is being processed. The Ship Setup
Options - Sensor Values tab will also
show Current Values for NMEA data if
congured to receive it.
► Check that the device that you receive
roll information from is ON and that all
your serial cables are still connected to
your WASSP computer.
► Check that the correct sensors are
selected in the NMEA tab of the Ship
Setup Options - this conguration could
have been inadvertently changed.
► Check that the Roll Correction settings
have not been changed under Ship
Setup Options - Sensor Values tab.
If the transducer has been re-installed,
the Swap Array setting could have
changed in which case you will need to
invert the Swap Array setting.
If the roll offset is incorrect, a slight roll
of the display will occur.
If the Swap Roll setting is incorrect you
will see a doubling of the actual vessel
roll (i.e. the roll received when Roll
Correct is disabled).
… 57 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno WMB-3250 Wassp at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno WMB-3250 Wassp in the language / languages: English as an attachment in your email.

The manual is 10,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info