648605
15
Zoom out
Zoom in
Previous page
1/62
Next page
Doc. P/N: WSP-009-004
Version: V1.3
Issue Date: August 2013
www.wassp.com
Page 15 of 62
Operator Manual
The transmit power level selector / indicator controls how much power is
put into the water i.e. the strength of the ping. It can operate in both manual
or automatic modes. However, initially use auto power by signal (BLUE) or
~Power Level 7 in the manual mode until you are familiar with the operation of
the unit.
Manual Mode (Yellow)
There are 14 transmit power levels that can be selected. Click the increment
(+) or decrement (–) buttons to adjust between 01 and 14.
Auto Mode (Blue / Green)
Double-clicking the LED indicator selects the auto mode, indicated by the
LEDs changing to GREEN or BLUE. GREEN automatically selects the power
based on the depth. BLUE automatically selects the power based on the return
signal level. See “4.8.6 Power Tab” on page 25 if you wish to change the
Automatic Power settings.
4.5 Power Level
Double-click on the transmit power
level window to switch between
manual and automatic modes.
The Pulse Width adjusts the duration of a single pulse from the transducer.
Higher pulse widths allow more power but at the expense of resolution. The
Pulse Width is displayed as preset times in tenths of milliseconds.
Set to adjust automatically by using Auto Mode until familiar with the operation of
the unit.
Manual Mode (Yellow)
There are 5 pulse width levels that can be selected. Click the increment (+) or
decrement (–) buttons to adjust between 1, 2, 5, 10, 20.
Auto Mode (Green)
Double-clicking the LED indicator selects the auto mode, indicated by the LEDs
changing to GREEN.
4.6 Pulse Width
To allow Auto Mode to change from Power Level 8 to
Power Level 9, the Pulse Width must be set to at least
0.2ms (02), otherwise the power level will not increment.
Ensure that the pulse width is set to Auto Mode to avoid
weak seaoor returns in deeper water (see below).
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno WMB-3250 Wassp at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno WMB-3250 Wassp in the language / languages: English as an attachment in your email.

The manual is 10,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info