522144
15
Zoom out
Zoom in
Previous page
1/52
Next page
2. WIRING
2-5
NMEA0183 equipment
To connect an NMEA0183 equipment to TZT9/14, use the CAN bus network via the
optional NMEA data converter IF-NMEA2K2 (or IF-NMEA2K1). This NMEA connec-
tion can accept a baud rate of 4800 or 38400.
Heading input to TZT9/14 allows functions such as Radar Overlay and course stabili-
zation (North up, Course up, etc.) in the radar operating modes. The NMEA0183
heading refresh rate needs to be 100 ms in order for any radar function to work prop-
erly. NMEA0183 heading can be accepted on any CAN bus port at a baud rate up to
38400 bps. In other words, data sent (IF-NMEA) and received (TZT9/14) must use the
same baud rate for each individual data port.
Note: Heading data from a CAN bus source/sensor is always at the correct refresh
speed for the DRS ARPA function.
2.1.4 VIDEO, DVI-D, AUDIO or USB ports
How to connect VIDEO, DVI-D, AUDIO or USB ports
The above-mentioned ports are behind the connector cover on the rear panel. Access
the ports and connect cables as shown in the procedure below.
Note: The display unit must be mounted in a console or indoors to do this connection
because of reduced waterproofing.
1. For TZT9, unfasten two binding screws to remove the fan cover.
2. Unfasten four binding screws to remove the connector cover at the rear of the
equipment.
Binding screw
(2 pcs.)
Fan cover
Connector
cover
Binding screw
(4 pcs.)
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno TZT14 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno TZT14 in the language / languages: English as an attachment in your email.

The manual is 45,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Furuno TZT14

Furuno TZT14 User Manual - English - 16 pages

Furuno TZT14 User Manual - English - 250 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info