522210
36
Zoom out
Zoom in
Previous page
1/52
Next page
3. INSTALLATION
28
No. Menu Description Default
1 SPEED [1 AXIS]: Display FWD/AFT speed.
Forward: FWD (), After: AFT ()
[VECTOR]: Do not display the direction of the ship’s move-
ment.
Note: The [VECTOR] speed consists of forward/after speed of
the ship and the influence of tidal current/wind. Requires multi-
axis speed data.
[1 AXIS]
2 DIMMER [MAIN]: Set the unit which is connected to the dimmer con-
troller in the daisy chain connection as the main unit.
[SUB]: Set the unit which is not connected to the dimmer
controller in the daisy chain connection as a sub unit.
[MAIN]
3 NoChkSUM [Enable]: Receive NMEA0183 sentences with and without
checksums.
[Disable]: Do not receive NMEA0183 sentences that do not
have checksums.
[Disable]
4 BAUD-RATE [CH1/2 4.8k]: Select if the CH1 input data or CH2 input/out-
put data is 4.8 Kbps.
[CH1/2 38.4k]: Select if the CH1 input data or CH2 input/out-
put data is 38.4 Kbps.
[CH1 4.8k],
[CH2 38.4k]
5 S-OUT [ON]: Share the sensor signal in the daisy chain (pattern 1 in
the system configuration).
[OFF]: Do not share the sensor signal in the daisy chain (pat-
tern 2 in the system configuration).
[ON]
6DOT LED
RANK
Set the rank for LED brilliance in order to even out the brilliance
of the remote displays in the daisy chain connection. Press T
or S key to set the value. The setting range is 1 to 3. [3] is the
highest ranking.
-
7 ALL CLEAR [NO]: Do not clear the settings. Select [NO] and press the
MODE key. After saving the above setting, the equipment
restarts.
[YES]: Clear the settings. Select [YES] and press the MODE
key. The equipment restarts with the default settings.
When clearing the settings for RD-20, the following items are
restored to default.
Settings for the data display (screen mode), display mode,
unit of measurement, direction of the ship, display brilliance
Settings for the user menu
Settings for the system menu except the rank for LED bril-
liance
[NO]
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno RD20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno RD20 in the language / languages: English as an attachment in your email.

The manual is 4,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info