Manual Furuno NavNet 3D Chart Installation Guide v3.0 (page 8 of 21) (English)

522217

Zoom out

Zoom in

1/21

Page 8

2.3.2. Paste the Chart Data

Note:

Insert a properly formatted 2GB SD-card into the SD-Card reader of the computer or a

USB flash drive. If a folder doesn't automatically open, follow the instructions below:

Please refer to the Appendix at the end of this document (Section 6.) to learn how

to properly format the SD-Card or the USB flash drive prior to transferring the chart

data.

• Click Start and select “My Computer”.

• Double-click on the Removable Disk. The name of your external drive may vary

(see Figure 2.9).

Figure 2.9

Paste the file(s) at the root directory of the SD-Card or Flash Drive (CTRL-V or “Edit” >

“Paste”). (See figure 2.10)

Figure 2.10

Note:

If you are using a Flash Drive to load the chart(s) into a MFDBB, you are not

limited to transfer 2GB at a time. You can load multiple charts at the same time as long

as you don’t overload the MFDBB memory. To know how much data you can load on

the MFDBB, look at the number of Memory Slots available (Menu -> Chart Catalog) and

multiply this value by two. This will give the maximum number of Gigabits that you can

load on the MFDBB (ex: if four memory slots are available, you can load up to 8GB of

data onto the Flash Drive)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Furuno NavNet 3D Chart Installation Guide v3.0 in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Furuno NavNet 3D Chart Installation Guide v3.0 Manual

Product: