13373
51
Zoom out
Zoom in
Previous page
1/97
Next page
8. MENU SETTINGS
8-3
Entering GPS speed smoothing
1) Press MENU ESC, 9 and 6.
2) Press
or to select Spd.
3) Enter smoothing factor in three digits
(0000-9999).
4) Press the NU/CU ENT key.
5) Press the MENU ESC key.
Entering speed averaging
1) Press MENU ESC, 9 and 6.
2) Press
or to select Speed Average.
3) Enter smoothing factor in two digits
(0000-9999).
4) Press the NU/CU ENT key.
5) Press the MENU ESC key.
Selecting RAIM Function
1) Press MENU ESC, 9 and 6.
2) Press
or to select RAIM Function
on page 2/2.
To Previous Page
Posn Offset 0.000’ N 0.000’ E
Time Diff. +00:00
Posn 38 00.000’ N 123 00.000’ W
GPS SETUP 2/2
MENU : Escape
: Select
ENT : Enter
: +/-
RAIM Function OFF
Geodetic Datum WGS84 NAD27 OTHER
(Cannot be changed) (001)
RAIM Accuracy 100 m
ON
Figure 8-2 GPS SETUP menu, page 2/2
3) Press
or to select RAIM Function
desired.
4) Press the NU/CU ENT key.
5) Press the MENU ESC key.
Entering RAIM Accuracy
1) Press MENU ESC, 9 and 6.
2) Press
or to select RAIM Accuracy
on page 2/2.
3) Key in the range for which you want to
know RAIM Accuracy (1 to 999 m).
Note: Unit is meter only.
4) Press the NU/CU ENT key.
Press the MENU ESC key.
Entering geodetic datum
1) Press MENU ESC, 9 and 6.
2) Press
or to select Geodetic
Datum on page 2/2.
3) Press
or to select geodetic datum
to use. For geodetic datum other than
WGS-84 or NAD-27, select OTHER and
key in chart number (001-173) referring
to the geodetic chart list in the Appendix.
4) Press the NU/CU ENT key.
5) Press the MENU ESC key.
Entering position offset
If you do not know the type of chart you are
using, GPS position may be wrong. Note the
difference in position when moored to a pier
and enter it on the GPS SETUP menu, to get
correct position.
1) Press MENU ESC, 9 and 6.
2) Press
or to select Posn Offset on
page 2/2.
3) If necessary press
to switch from
north latitude to south latitude or vice
versa.
4) Key in latitude correction.
5) If necessary press
to switch from
east longitude to west longitude or vice
versa.
6) Key in longitude correction.
7) Press the NU/CU ENT key.
8) Press the MENU ESC key.
The
L
L
icon appears when L/L offset is
applied.
Entering time difference
1) Press MENU ESC, 9 and 6.
2) Press
or to select Time Diff on
page 2/2.
3) Key in time difference (-14:00 to +14:00).
4) Press
to change from plus to minus
or vice versa.
5) Press the MENU ESC key.
51


Need help? Post your question in this forum.

Forumrules
1

Forum

furuno-gp150

Reset search

  • Furuno GP-150. The gps date is suddenly changed to 2002 May 20.How can I change back the present date?
    Submitted on 4-1-2022 at 12:52

    Reply Report abuse
  • Furuno GP-150. The gps date is suddenly changed to 2002 May 20.How can I change back the present date? Submitted on 4-1-2022 at 01:07

    Reply Report abuse
  • How to setup the present date of GP150 GPS when suddenly changed of date automatically? Submitted on 3-1-2022 at 18:02

    Reply Report abuse
  • The gps date is suddenly changed to 2002 May19.How can I change back the present date? Submitted on 2-1-2022 at 10:48

    Reply Report abuse
  • The date is suddenly changed to 2002 May19.How to change back the present date? Submitted on 2-1-2022 at 10:45

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno GP150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno GP150 in the language / languages: English as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info