641191
21
Zoom out
Zoom in
Previous page
1/58
Next page
-1.13-
1.8 In the Event of Antenna Coupler Failure
HIGH TENSION HAZARD
DO NOT TRANSMIT WHEN ATU IS OPENED
The Antenna Coupler automatically tunes a wire or whip antenna to the transceiver. When the
tuning cannot be completed for all frequencies, TUNE OK will not appear on the operation
display. In this case, you can take tuning on 2182 kHz by manually operating Coupler as below:
1. Turn off the transceiver unit. Remove the cover of the Antenna Coupler.
2. Set the MANUAL-AUTO switch to the MANUAL position.
COUPLER BOARD
DUMMY
LOAD
BOARD
MANUAL AUTO
3. Replace the cover.
4. Turn the FS-1562 on and press the [2182] key for selection of 2182 kHz.
1.9 DSC Distress Calling
When connected to a Digital Selective Calling (DSC) terminal having the capability of
controlling the FS-1562 such as FURUNO DSC-6:
1. Press the [DISTRESS] key on the DSC Terminal (Model DSC-6 for instance).
2. When a coast station acknowledges the call, the DSC Terminal displays “Received Dist Ack”
and sets the predetermined DISTRESS frequency (2182 kHz) on the FS-1562.
3. Communicate with the coast station.
When connected to a DSC Terminal without remote control:
1. Select 2187.5 kHz on the FS-1562. (This step is not required with Furuno DSC-6.)
2. Press the [DISTRESS] key on the DSC Terminal. The DSC distress signal is transmitted over
2187.5 kHz.
3. After the DSC terminal notifies that a coast station has acknowledged the call, press the [2182]
key on the FS-1562.
4. Communicate with the coast station.
NOTE: For details of distress calling by a DSC Terminal, refer to the operators manual for the
DSC Terminal.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Furuno FS1562 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Furuno FS1562 in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info