Manual Furuno FS-1503 (page 20 of 58) (English)

612626

Zoom out

Zoom in

1/58

1-14

Receiving AM broadcasting stations

1. Press the [MODE/1] key repeatedly to select H3E.

2. To tune in a 15,260 kHz shortwave station, for instance, press as below:

[RX], [1], [5], [2], [6], [0], [0], [ENT]. Be sure to enter the last zero.

Squelch control

Squelch is used to mute the receiver audio output when the receiver input is less than a preset

value or dominant noise is higher than a preset (1000 Hz) frequency. To switch the squelch

function ON, press the [SQL/5] key. Make sure the label “SQ” appears on the display. To pick

up a weak signal at high audio frequencies, you should remove the squelch function notwith-

standing a possible increase of background noise. To do this, press the [SQL/5] key again.

Make sure the label “SQ” goes off.

Noise blanker (NB)

The noise blanker clips inputs of noise resulting from an engine ignition or motor brush sparks.

It can be enabled or disabled through the system settings.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Furuno FS-1503 in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Furuno FS-1503 Manual

Product: